This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Jeroenvano
About
- Username
- Jeroenvano
- Joined
- Visits
- 1,184
- Last Active
- Roles
- Member
Comments
-
UE48JU7500 does not work
-
Not sure this is a bug or missed feature in the app, but it seems like better logic higher/lower/is exactly can not work with values behind the comma or behind the dot? Flow 1 Example value is set to 0.1 (rain mm) value shows in better logic corre…
-
Phuturist said: Jeroenvano said: DieterKoblenz said: They can trigger flows. Use the Better Logic Trigger Card "A variable has changed" to trigger flows when you switch it. That's what I tried, these do not trigger when…
-
DieterKoblenz said: They can trigger flows. Use the Better Logic Trigger Card "A variable has changed" to trigger flows when you switch it. That's what I tried, these do not trigger when you switch it.
-
After the update to v1.0.6 I found my Homey suddenly added to another z-wave controller and am unable to Exclude Homey from this mistery pair? Factory reset zwave is the only option and to pair all devices again - sigh - Was very hopefull seeing th…
-
RobinVanKekem said: Actuall, @RalfVanDooren did the heavy lifting for the dimmer 2 Kuddo's for @RalfVanDooren
-
Just saw the Fibaro app is updated, now with dimmer 2 included. Installed my dimmer 2 modules and they are working great! Huge Improvement @Athom - Kuddo's!
-
Just saw the Fibaro app is updated, now with dimmer 2 included. Installed my dimmer 2 modules and they are working great! Huge Improvement @Athom - Kuddo's!
-
Thorarin said: Jeroenvano said: Strips unable to add with basic Homey zwave Does the actual adding fail? I'd expect that to work, but Strips isn't configured to use basic reporting by default. If you're able to set configurati…
-
Had to factory reset after the update as KAKU and Somfy apps crashed all the time. Now after factory default + adding apps Positive: KAKU works + range has improved, Somfy works, Fibraro plugs work Netatmo able to read data, flows do not trigger …
-
mistercage said: @Jeroenvano , could you share with us how you connected your USR TCP232T ? Pictures would help me a lot. Can't seem to find my panel as it doesn't get an IP address. I have jumper cables female-female, a USR TCP232T and connect…
-
fiek said: Jon said: Can anyone, especially @superice tell me why, when outside of my home's wifi network, all devices are invisible in the Android app? I'm on .39 and app build 53. same here... Same here
-
RamonBaas said: @Jeroenvano: When adding the panel, does it show the serial number of the panel correctly? Otherwise contact me on homey.powermax _at_ gmail.com and we'll setup a debug session. So I removed the panel and started registr…
-
@RamonBaas Had to reboot again today as zwave became unstable. After reboot the powermax app did not start wel as all devices showalarm_contact:undivined. Gave it some time but after 30min no changes. Last time I could by simulating adding new d…
-
I installed 2 Sensative strips on the attic windows: Pairing worked with Homey added as sensors. Homey recognizes the contact alarm in the cards correctly, battery level is indicated correctly, tamper alarm also works only the generic ala…
-
Agreed @KoenMartens I am not against more advanced flows using logic cards but the simpler the better as it would help adoption into a wider potential consumer market.
-
Thanks @0burner0 for your advise for plan-B, I will correct and create 3 flows. But still my opinion is that this should work with one simple flow if homey wants to have more non-geeks as customers. 1Flow: Trigger: It starts raining (bui…
-
If I am remote (not on WiFi) the app does not work, opens but does not show any cards. Chrome with my.athom.com works always so good to have a plan B but the app is useless when not connected to the local WiFi. Also using a remote WiFi network does …
-
RamonBaas said: Jeroenvano said: After a Homey reboot all sensors give "alarm_contact:undivined" Any idea what is causing this? When the state of the sensor is not (yet) known, it has value 'undefined'. See https://github.com…
-
After a Homey reboot all sensors give "alarm_contact:undivined" Any idea what is causing this?
-
Push messages to my phone are not working? It worked for a day or so but now I am not recieving messages. Is this a known issue? Or just happening to me?
-
Did you add them as powernode sockets and then chose "other" under devices? Only then you will get power insights. If you identify it being a light you do not get power insights. This is also the case on my fibaro wall plugs. Not sure why athom c…
-
No have Powermax Pro, found the problem looks like push messages are not working somehow on my phone. Sensors do work now, currently playing around with the countdown timer Thanks anyway
-
Hi I have been playing around with some flows. But it seems to me that the movement sensors do not report movement when the alarm is deactivated. Not sure if my flows are right or someone has a different experience? Would also be nice if we could…
-
Thanks @RamonBaas I was able to add my panel to Homey The only thing is I am not able to add the Sensors, etc. When I click for adding a new sensor I get the screen "Volg de instructies" but it stays blank ? Any idea what this could be? BTW dur…
-
Hey all I got myself a USR-TCP232-T and was looking for some help to find the connection pin layaout to connect to the Powermax Pro. Some people got me in the right direction but as a Noob on this I want to be sure I have it correct. So far …
-
When adding a Somfy device it would be nice if we could also choose for a RTS terrace sunscreen. The point is I have it working with Homey (added as a window sunscreen) but the logic (in flows) open/close is opposite to window blinds. A window suns…
-
@Athom @Emile seems that you just forgot to update api.athom.com yesterday as all other *.athom.com sites have been updated on 26/05/16. Hope you can fix this asap so we all can use the Web interface again.
-
mruiter said: They quickly updated the app at athom. they are afraid of you Is this updated in v1.1.7 or the next version?
-
Can my Homey please return to .29? With .32 Z-wave is completely disfunctional at times, the app is super slow. Flows get in loops or run 20+ times ... see acreenshot Hope .33 gets released soon where we can rely and enjoy stable z-wave environment…