This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
JPe
About
- Username
- JPe
- Joined
- Visits
- 1,509
- Last Active
- Roles
- Member
Comments
-
If you speak Dutch, you can look at https://www.robbshop.nl/modules/aansluiten-modules/mogelijkheden/schakelaar-aan/uit/frequentie/z-wave-plus/aantal-schakelaars/2/fabrikant/fibaro-qubino
-
If you have enough space behind your switch, you could try something like this, Fibaro has something comparable DOUBLE RELAY SWITCH FGS - 221
-
-
did you check if you can use https://apps.athom.com/app/org.scheffers.homey.sets @PitVM https://github.com/athombv/homey/issues?q=is:open search if there is already a topic on this, if not make a new topic.
-
caseda said: The dimmer is a light by default, when you include the switch you get the option for "a light attached", so you will need to re-include it. It's not the devices "Name" you should change but the connected device should be "La…
-
sorry, see next..
-
Sorry I did not look at the supported devices for Homey, it's not there (the diode was meant as prevention of the relay being activated in both directions) https://apps.athom.com/app/com.qubino maybe you can use Flush Dimmer 0-10V, used not as dimm…
-
you can connect a relay with a diode on the output Or the Flush 1D relay (unfortunately this is for 24V DC )ORDERING CODE ZMNHND1
-
Disable microphone is also possible via a Flow
-
You can activate a delay in the close(omlaag)-command of the second of ~3seconds and the third ~6seconds point to the watch in the upper-right corner of the command card.
-
https://github.com/athombv/node-homey-433/blob/master/HOWTO_CREATE_SIGNAL.md https://developer.athom.com/docs/apps/tutorial-Signals.html https://developer.athom.com/docs/apps Here you will find more information about integrating new devices into Hom…
-
mruiter said: what do u mean ? U don't have to say U, you can call me Sir, or did you try to be funny?
-
@Rocodamelshe Why do you (and only you ) always use "u" instead of you, the general rule for this forum is to write in English, the word "u" is not English and you probably know that, please be aware that you as a Moderator should be an Example for…
-
In a flow, you can check in the AND column for many devices if they are all off, and react on that in the THEN and ELSE columns. You also can make a flow that switches OFF, all lights that you want to be OFF, it does no harm switching OFF, devices …
-
How can I get rid of Unknown z-wave nodes? I thought they would get deleted automatically
-
When something not work as expected, it's always a good practice to pull the plug for 10 minutes and then try again, give Homey several minutes to start up all devices, be patient.
-
@Bram Since 1.5.6-RC6, Homey alarms (wekker in dutch), even when not active, start telling me, after a tune, it's time to get up, only an alarm-time is set, no flow is started, why ??? (yes I know I can remove the alarms) edit: enable and disable …
-
https://github.com/athombv/node-homey-433/blob/master/HOWTO_CREATE_SIGNAL.md
-
Lakeman said: Oy1974 said: Ofcourse the luminace doesn`t change when its completly dark So you want when luminance is less then 666 and its not between 22:00 and 06:00 hours to switch the plug on, else turn off?? Delete the "lumina…
-
maybe you have to swipe the right side of the picture to the left to make the temperature visible? In the flow-editor, if you pull down the Tags, can you find the temperature-tag from your device there? (filter on bilv..) if so, the temperature is …
-
@Just_A_User In my flow, I have 2x the open command, 1 time directly and the second one 1 minute later, the RF signals can always be interrupted by other signals because they can be sent by many devices at any time so you get collisions, I have a w…
-
the longest possible signal isn't always the best, for some devices the shortest signal works best because, for these devices, the long signal is seen as a start+stop signal, so start opening and stop opening the "rolluik" http://www.interglot.com/d…
-
did you press "Save settings" after changing the value to 0 ??
-
https://forum.athom.com/discussion/3407/sonoff-ewelink-switches#latest https://www.banggood.com/DIY-Wi-Fi-Wireless-Switch-For-Smart-Home-With-ABS-Shell-p-1019971.html?rmmds=buy&cur_warehouse=CN cost only 4.50 Euros Remark: doesn't work complet…
-
https://apps.athom.com/app/com.internet there are also instructions how to
-
-
@robertklep Great that you picked this up, thanks After downloading and unzipping the files, I could not find the file "pair.json" can you indicate, in what folder the file "pair.json" can be found or should be placed?
-
https://github.com/athombv/homey/issues/1856
-
CarlaWiedenhoff said: Wat doe ik fout? Het enige dat je fout doet, is denken dat Homey het goed doet, helaas Is door de makers van Homey erkent als een Bug.
-
hope this gives an idea