This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
JPe
About
- Username
- JPe
- Joined
- Visits
- 1,509
- Last Active
- Roles
- Member
Comments
-
Thats great news @Nattelip , thanks very much!
-
Changed the timing parameters of the MainNode only, no more blinking now: Delay with firsttime use is still there (first test 35 sec.)
-
Unfortunaly negative for me, since last update (V1.0.6) the green(ON/OFF) lights on the greenwave modules start blinking and stop blinking after some time, also the plugs switch with a delay of 10 to 300 sec. after not being used for several hours (…
-
@RobinBolscher ; settings seem to be changed in the Version 1.0.6 After re-pairing, the "main" Node still has the Name PowerNode 6 as well as the 6th Plug Is there a ChangeLog for this v1.0.6 ??
-
In the Athom Appstore is an App: Somfy Control your somfy RTS devices with Homey.
-
@jjtbsomhorst You should not use AAA batteries 1.5V these are not rechargeable, you need 4xAAA NiMH, this are rechargeable, see the manual : Important! Only use rechargeable batteries. Non rechargeable batteries are not allowed to be recharged …
-
12 Technical specifications (copy from the manual) Main power source: Battery 4xAAA NiMH (not included) Alternate power source: AC to DC 5V 1800mA, switch mode power supply with output regulated to 5V and a micro USB type B connector (not included)…
-
@Bumblez In that case I don't see a problem in using these splitter cables, also if you need to power several USB devices, you can use a simple USB-HUB with one powersupply.
-
Many "OR" functions can be created by "inverted logic", that means use f.i. (NOT monday) AND (NOT wednesday).
-
0burner0 said: JPe said: Maybe this is something you'r looking for http://www.teptron.com/move.html the bluetooth version are shipped already, the z-wave versions planned for 2017. Move is only for up and down. (correct me if i…
-
Bumblez your Homey needs a 5 Volt USB connector for powersupply, the device that @MHubert mentioned looks very good, preferably build in a metal housing (grounded) It is a switching device, so it's recomended to use the original Homey USB-cable (…
-
Maybe this is something you'r looking for http://www.teptron.com/move.html the bluetooth version are shipped already, the z-wave versions planned for 2017.
-
Don't see my PUSH messages anymore since this vesion, anyone else having this problem also???? In TESTing a flow, it works, but started by an event in a flow, it doesn't . Edit: found a solution, the flow should be triggert by "Time = xx:xx " …
-
@Casper Homey Firmware Versie: 0.10.5 Samsung Smart TV v0.0.4 Casper Boone My TV UE46D800 cannot be connected, will this be possible in the (near?) future ?
-
@athom, It seems this app was only made for me, no one else has responded last 3 weeks, thanks for making it, but it cannot be installed on the new 0.9.x software, see the error stack trace above. Will the software be updated? Please leave a message…
-
Thanks @Phuturist this is very usefull information, you didn't mention your source, is it secret? Is there a general information source for this kind of info?
-
@Phuturist or anyone else: Can you tell us, where can we find the list of Parameters for the Greenwave NP310-F ??
-
Homey 0.9.1 and 0.9.2 Error after installing La Crosse app: Stack trace: Error: invalid_signal_id:[object Object] at new Signal (/homey-app/various/rf.js:44:12) at init433 (/drivers/TX3-THN/driver.js:161:12) at module.exports.init (/drivers/TX3-TH…
-
It will significantly change 2 times a year, if you are using DST !!
-
LaCrosse Crashes with new 0.9.1 , also after reinstall and power-down -- power-up in the previous version (0.8.39) it could be installed an values where readable in the device, but I could not make a working flow with the values.
-
The communication seems to be ok because the values of temperature and humidity are shown in the device after pairing. But there are problems in the flow, I was not able to trigger a flow on a change of a value or at reaching a value. If someone suc…
-
who can make this working for Homey? https://github.com/jishi/node-sonos-http-api so we can use Sonos while waiting for Emile.
-
mitch , you probably have the most resent stable version installed. v0.8.39 is a experimental version and you have not checked that item.
-
powerdown Homey for a couple of minutes and be supprized (after power-up)
-
Also unclear for me: Does somebody know how the "Alarm Cock" and/or the "Reminder" funtions in the FlowEditor can be used? Please give an example on how they can be sett.
-
Same problem with Samsung Tablet SM-T520 Android 4.4.2 HomeyApp V2.1 build 45
-
first of all, its to simple to ask for a solution without trying it yourself, second, you cannot switch ON and switch OFF in one flow, first make a flow to switch ON, test it and improve it, (it mostly doesn't work the first time...) than make a flo…
-
JurgenHuijbregts said: Cool i really would like X10 working Same for me, still have many X10 devices that have to be replaced after a while, but not all at ones, thanks for taking this up.
-
@BasVanDenBosch Yes, Homey shakes the shutters on the second page? (in my case) thereafter no moving anymore.