This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
JPe
About
- Username
- JPe
- Joined
- Visits
- 1,509
- Last Active
- Roles
- Member
Comments
-
Je hebt een flow gemaakt voor de LedRing, het commando staat in de "Dan" kolom, als onder dit commando een tweede commando plaatst, die de LedRing weer terug zet, met een tijdvertraging (instelbaar door op het klokje te klikken) dan heb je je doel b…
-
@jovink @adju Er is met de Somfy app nogal geëxperimenteerd met het aantal keren herhalen van het bericht, dit aantal keren kan bij het "pairen" blijkbaar ingesteld worden (heb ik zelf niet geprobeerd) https://github.com/athombv/homey/issues/912…
-
@mruiter https://github.com/mruiter/com.popp/issues/3 still waiting, I want to use the power-measurement function, can you fix this?
-
https://www.somfy.nl/elektrische-raamdecoratie/welke-raamdecoratie-/elektrische-rolgordijnen kies wel de RTS versie die kan door Homey bediend worden ( duur niet verwarren met hoge prijzen
-
made it https://github.com/athombv/homey/issues/1590
-
Zelfde ervaring, max 10 ruimtes alles boven de 10 zijn niet zichtbaar.
-
wimpy said: My experience is also that homey is very slow in the zwave network, it sometimes takes 8 seconds before any switching takes place. I hope this gets resolved in the 1.3 software. indeed z-wave is much better in 1.3
-
https://www.robbshop.nl/popp-tussenstekker-schakelaar-type-e?sqr=popp& De POP is een Z-Wave tussenstekker schakelaar met een gunstige prijs/kwaliteits verhouding. Maximaal vermogen: 3500Watt. Edit: sorry this one has no current measurement, I …
-
For me it was obvious that the command "Say something" c.q. in Dutch "Zeg iets" would be directorable to all connected speakers by choice, unfortunately this seems not to be the case, will this be implemented? and is it already planed?
-
Thanks @Rocodamelshe , that did the trick, glad that some people do read the notes and this discussion
-
@turbo1l the 433MHz signals are always repeated several times to ensure that they are received, this takes some time, if you want to control more than one device in the same flow, then you have to start the commands with a short delay in between t…
-
pull the mains-plug, wait for 10-15 minutes, then re-insert the mains plug and let Homey start-up again, in this forum this called "PTP". Edit: now I found that I have the same isue also sometimes (1.2.2.) @Athom please look into this.
-
@Hans_Breda Heb je ook gekeken of jouw type toestel wel in de lijst van Casper staat? Veel typen worden niet ondersteunt, vooral nieuwere typen. Vast IP in TV instellen werkt ook goed, hoeft niet per se in de router. Heel handige tool voor mij …
-
What can I say to Homey? https://www.athom.com/nl/support/KB000037/ https://www.athom.com/en/support/KB000037/
-
Next to the ability of grouping/ungrouping speakers, it would be nice to have the favorit Radio stations in Sonos selectable! Stefan likes the idea: https://www.facebook.com/athomnl/posts/1614947695184495?comment_id=1617398694939395&reply_comme…
-
@Slofware helaas heb ik geen slimme meter, wel Fibaro-2xSwitch, Fibaro-UniversalSensor, Qubino-2xSwitch, Popp/Duwi-WallPlug, Greenwave-6-MultiSocket, X10dimmers, Aeotec-MultiSensors, Sonos-speakers, Somfi-Zonnescherm. Bezig met over te schakelen va…
-
@Slofware als Krimpen a/d Ijssel voor jou een optie is, ben je welkom. 2923VP42
-
In -Settings -Microphone you can switch OFF the mirophone.
-
HarmLutjeboer said: MarcvZ said:Did you remove the wall-c first first from Homey before you tried to add it again? It was never connected to homey, I just received the device yesterday. It is always worth trying to EXclu…
-
Also had login problems, my solution: use chrome brouwser to login to your Homey, look for pop-up block, thanks to Bas Kiers, his comment to the problem: Your comment: Same here, Login Button seems not to work at all. New comment from Bas Kiers: …
-
@mranderson maybe you can take a copy of the GitHub Smartlock examples : https://github.com/jordenc/io.nuki.smartlock https://github.com/athombv/com.danalock https://github.com/timeggleston/com.yalelock and make the changes you need for the ID-loc…
-
TedTolboom said: @JPe, @Phuturist, @Eternity can you check and if so confirm that this only occurs on the PN-6? I only have 2x PN-6, both don't show momentary energy use, after some time, they all show 0W now (nomore dash).
-
@TedTolboom Don't see any momentary energy use anymore at all, at my PN-6, 2 sockets show 0 W, the other show "-" (just a dash)
-
powermarcel10 said: JPe said: powermarcel10 said: keverjeroen said: It's here! https://firmware.athom.com/ 1.2.0-rc.8 experimental - Added Homey Music - Added new Speech API. - Improved 433/868/IR signal recept…
-
powermarcel10 said: keverjeroen said: It's here! https://firmware.athom.com/ 1.2.0-rc.8 experimental - Added Homey Music - Added new Speech API. - Improved 433/868/IR signal reception - Fixed a bug that could cause Z-Wave locku…
-
In the past I had some EATON devices working on X10 protocol, not sure if these xComfort devices react on X10? X10 is available for Homey so you probably can try it (maybe you need a device that is converting X10(rf) to X10(powerline)?
-
Thanks @gruijter_dev , in the Module-details of the Plugwise-Source, I found : Magnetron 000D6F0000469F6C Circle+Koffiezetter 000D6F00003D4F9E Circle
-
Where can I find the 'MAC' of the circles, I only have the Circle ID as a 5 digit hex number? (Haven't used the circles for a long time, but most of them are still plugged in) Never mind, I already found it in the Module-details.
-
Hi @mruiter , see you are active with Popp again, when do you finish the PlugIn's ?
-
@thayoung1 http://www.teptron.com/developers.html to start with?