This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Homey_Lampje
About
- Username
- Homey_Lampje
- Joined
- Visits
- 666
- Last Active
- Roles
- Member
Comments
-
TedTolboom said: @Homey_Lampje can you contact me on Slack? To get it working, the Get trigger needs to be disabled and you'll need to add the msMeasureHumidity and msMeasurePressure report parsers manually (or add them to the library)... …
-
I managed to pair the new Xiaomi Aqara weather (temperature, pressure and humidity) sensor by adding an additional device driver to @TedTolboom his app...
-
@RamonBaas thanks for the suggestion, will gif this a try (for the cresta sensor which is showing a lot of rejections...). Success with the WS-1100... upgraded Homey to 1.5-RC5 firmware... and to my surprise the WS-1100 was detected as a Conrad 86…
-
nothing is received by homey from the Alecto WS-1100... My Cresta sensor is working, although I see a lot of rejected telegrams. Also the Cresta sensor is just a couple of meters away from Homey.
-
Anybody else using the Alecto WS-1100 sensor? Homey / the homey app does not recognize the temp/humidty sensor (WS-1100), the original base station does however... The sensor is standing 3 meters away from Homey... should be in reach... Any sugg…
-
fault is in your telegram / interface... it worked before right... go back to the situation when it did work... and troubleshoot from there.
-
See my post june 3rd....
-
With the help of Ramon it became clear to me (us) that the above mentioned problem is not related to the DSMR v5 telegram produced by my smartmeter... but it all has to do with the interface I am using http://www.esp8266thingies.nl/wp/ This particul…
-
@RamonBaas Done. ps. had a little finger trouble sending you a PM... you can delete the one under profile/activity.
-
@RamonBaas today Liander installed an Iskra AM550 meter (DSMR v5)... I get a Telegram decode error. --- debug info --- Dutch Smart Meter application started Dutch Smart Meter pairing has started... 23:38:58.980 Request to search for DSMR on 1…
-
@MennoVanGrinsven I checked, sorry to say but yes same problem with the latest version. Side by side screenshot of Node RED and Homey, Node RED is working fine as you can see.
-
Tested 1.0.1, no crashes anymore.
-
@MennoVanGrinsven sorry for the late response I missed your post... Did some testing... without TLS everything works fine, when I enable TLS + disgard self signed the app crashes. See attached log, hope this helps.
-
@MennoVanGrinsven yes I do.
-
@TedTolboom @RamonBaas both thanks for the clarification... I was wondering where "large.jpg" and "small.jpg" where used for... well that is also clear now. Yesterday I played around with the icons... I am satisfied, see below for some screenshot o…
-
...."the device icon".... uuuuh, where can I find these Homey device icons? I have changed the waterdrop icon into a "real" watermeter icon, looks great I think. I am still seeking for a better looking icon for "Doorstroming" and "Dagtotaal".
-
@TedTolboom that worked out okay... thanks for your help.
-
@TedTolboom Thanks. My watermeter is a Sensus 620 with a pulse sensor (HRI) attached. For every liter of water used the HRI gives me a pulse, which I feed into a Wemos D1 Mini (arduino). In my adruino sketch I do the pulse counting and water flow c…
-
@PBaan93 here you go https://github.com/nlrb/nl.dsmr.p1
-
@PBaan93 is working fine for me. Download from GitHub and install via cli.
-
@RamonBaas when your are fine I am fine, my interface is working thanks for your help.
-
@RamonBaas you were right about the ":" it was inserted by my interface, sorry for that! I played to much with the settings of the interface... I corrected it... did a capture direct from interface into file... all back to normal again. Note the ch…
-
@RamonBaas you did it! Working fine now.
-
@RamonBaas okay will fork and investigate (time permitting this time...). This ":" is inserted by the software, the telegram I sent you is coming directly from my P1 interface (capture into text file). I use this http://www.esp8266thingies.nl/wp/ …
-
@RamonBaas a .txt file. If you can not substitute the meter id's with your own please sent me an email I will sent you one without the meter id's removed.
-
@RamonBaas sorry you mean a txt file? /ISk5\2MT382-1004 0-0:96.1.1(removed) 1-0:1.8.1(08119.557*kWh) 1-0:1.8.2(06431.582*kWh) 1-0:2.8.1(00000.003*kWh) 1-0:2.8.2(00000.002*kWh) 0-0:96.14.0(0002) 1-0:1.7.0(0001.02*kW) 1-…
-
@RamonBaas text what??? This what I capture from my interface.
-
Here you go...
-
@RamonBaas I notice that the v3 telegram now ends with a "\:" instead of just "\". The ":" is inserted by your code... attached screenshot is from the v3 specification.
-
@RamonBaas Unfortunately its no longer stuck in paring it just stops... Turned debugging on, here is the report (look as it will not decode the v3 telegram...).