This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
HansieNL
About
- Username
- HansieNL
- Joined
- Visits
- 748
- Last Active
- Roles
- Member
Comments
-
@swttt : I have 3 Hue bulbs controlled by Philips motion sensor. I have select the bulbs as on/off because I don't need the dim function. The sensor automatically dims the lamp for 30 seconds before it's completely switched to off. So the dimmed set…
-
satbopper said: ik heb een bericht voor de maker van de app achtergelaten Thx, nu maar hopen dat het snel weer werkt.
-
Robin said: We are not, after many tries we finally managed to reset the button which seems to work ok at the moment. What did you exactly do to reset? I still can't use one of my buttons.
-
I made my own version which use a local rss feed. I didn't use it for a while, but you are right, my version also doesn't work. Can you create a GitHub issue for this?!
-
I got 2 buttons. One has been working, but is not working anymore. Maybe same problem as Athom debugging describes. Other button is triggering a wake up flow and works great.
-
spoelly said: swttt said: Oh by the way, the current beta on github has no widget dialog! So for now you can't add any widgets. No need to install it for now @HansieNL this explains it
-
@swtt : when I try to add a widget I get add new page. If I hover over the plus sign I get the following link: http://192.168.2.48/app/com.swttt.homeydash/#!/setup/pages/newpage???
-
erwinrensink said: I installed the Toon app but a login error when trying to use the app. Any help? Because the app is still in beta test by Athom don't expect any support. More people are waiting till the app will officialy be released.…
-
Het is een kabeltje en een adapter.
-
Floodnl said: HansieNL said: I can only give an answer to the 1st question: https://forum.athom.com/discussion/1448/how-to-cli-install-method Tnx @HansieNL much appreciated let's hope the github project is still working (a bit) …
-
I can only give an answer to the 1st question: https://forum.athom.com/discussion/1448/how-to-cli-install-method
-
Anything known about Gramofon or Allplay?
-
Is there somewhere a Virtual Homey?
-
If you could add the Dimmed Spectrum version, that would be great. Now at level 1 the Spectrum screensaver is still to bright
-
benotje said: ik vraag aan homey (hoe warm is het) en homey antwoord (ik kon geen temperatuur sensoren vinden) de tag = Temph die ik uit lees van domoticz Is Temph een variabele? Als dat zo is kun je een flow maken en de variabele v…
-
ErikVanDongen said: Maybe this condition card can be handy to check for these situations and let a light or ledring turn if there's no connection. (Candy App). Not compatibele with my Homey version v1.1.2?
-
Maybe you can try this:
-
caseda said: @HansieNL i have a feeling, but it's hard for me to try out since both of my buttons works, even though still with too many battery reports. my feeling is that the button is not reset properly by homey's reset frame (what happens …
-
Robin said: HansieNL said: @caseda : button stopped working after update of app. I can't get it paired again. I did disable / enable app. I did reset button to factory default. I also did a reset z-wave network and homey ptp. All witho…
-
@caseda : button stopped working after update of app. I can't get it paired again. I did disable / enable app. I did reset button to factory default. I also did a reset z-wave network and homey ptp. All without getting the button paired again.
-
You can check at Settings - System at the top there's Homey's fw version noted.
-
Cleverred said: Thanks for the prompt reply! But my update is version 1.1.8 Both links goes to 1.1.2 :-( 1.1.8? Is that Homey's firmware version? Are you on developers channel?
-
You have to be logged in, then it shows you what Homey heard.
-
ErikVanDongen are you on slack now? 19:07:29 Api Authorization Required setting { value: false } 19:07:58 action.http_get_json { args: { url: 'http://192.168.2.14:8080/json.htm', data: '{"type":"command","param":"switchlight","idx":168,"…
-
I installed version 1.5, but my flows activating Domoticz switches don't work anymore. Am I missing something? This what I use now: Homey fw 1.1.2 and HTTP Get JSON card "http://domoticz-ip:port/json.htm" and "{type":"command","param":"switchlight",…
-
@luccie_007 : if you really want the standalone version check page 11 of this discussion. Somewhere in the middle there's a good description. @swttt : beta apps in the app store? I don't think that's a good idea with a retail product. Great project…
-
Eilandgast said: at 12:45? Why not?
-
V3 is up and running on my webserver. Waiting for new capabilties. If I switch on a light that has been switched of by Hue motion sensor, the lamp is not switched to full brightness.
-
Ok thanks, but I already got a webserver running with homeyDASH version 2. Manual creating config.json isn't gonna be a problem. Maybe I gonna try both and see what I like most.
-
If I understand it right the app version runs on Homey webserver? Just one more question. Which version is easiest to set up?