This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
GeurtDijker
About
- Username
- GeurtDijker
- Joined
- -
- Visits
- 4,393
- Last Active
- Roles
- Member
Comments
-
Sorry, no of course the ACM doesn't send a signal. So the Code checker wont work with te ACM switch but with the Remote (if you have any) if you have a remote paired, you can learn Homey that signal for the Switch as if it was a socket. If you wan…
-
Did you already test it with the code checker? If you see itit, will probably work like a socket. Try that first.
-
I just tested my SunScreen with an ASUN 650, closed it for approx 75 % (26 sec.) And opened it. No problems with 0.8.35
-
I don't know what values the Coffee maker accepts. For the ThermoSmart the Slider is already discussed I guess it is already on their list to change it to Cards with values, an other solution is also requested here: slider is really annoying #5…
-
Gerjan said: It look like my 433 range is not to good, I have 2 KAKU Motion sensors. about 4 and 7 meters from Homey. inside walls are between them. Anyone same issue? You are correct ;-) Your transmit power/range of the KAKU motion …
-
MarcoF said: mbalik79 said: The notifications works here only on my wife´s phone. If I select a mobile device in the card, there is text by the owner `android device` by my wife´s phone there stands the type of her phone. We have the s…
-
Thanks @aloft I tested and it works again..... I followed it a bit in Slack, Kudos to @Uranday , you and all others there!
-
BasVanDenBosch said: one of the first apps, stocks, also behaves badly apparantly: I have seen it with Twitter, NetAtmo and solar panel already. Although NetAtmo was the GitHub fork for multiple devices I think.....
-
Hi @aloft ;; I was thinking about a "Debouncer" using your Countdown disabling and enabling flows: https://forum.athom.com/discussion/comment/22576/#Comment_22576 ; Is it possible to create a Condition Card/ Condition "Countdown [NOT] running" Th…
-
MarkVanWinden said: When I create avariable, it wont get saved. installed the App again and also rebooted a couple of times. anyone else got this? Is there already a workaround for this "bug 600" ? or wo I have to wait for next Homey F…
-
What type number is on your doorbell? I guess it is a CBD-6500 ? They transmit other signals than the newer ... they are not compatible. http://www.klikaanklikuit.nl/service/gebruiksaanwijzingen-software/
-
and if you wear a smartwatch (fe AndoidWear) and send it as a Push notification to your phone you have every msg direct on your wrist ;-)
-
Your Flow: "AskBedRoomMotionTVOnce" as above 2nd card in Then: Disable (This Flow) 3rd card in Then: Countdown Timer "AskBedRoomMotionTVOn" for one hour If you say No the first time at 20:01 it will ask again is motion is detected later until 20u50…
-
Every Hour is a trigger, not a condition. So: Every Hour belongs in the first column: When You can't say, "every Hour" is True or False, Maybe you want a "The minutes == 00", that is a condition that is one minutes true every hour.... (but it isn'…
-
I have tested several things with the KAKU ASUN-650 with LEDs connected. As @caseda and @BasVanDenBosch write en in written in the manual: To close you send an close and the ASUN switches the close wire max 120 seconds. If you want to stop you ha…
-
When testing John Doe came home and Sunrise was at 21:23 That are the defaults for testing....
-
Imho the only solution is a real alarm in your technical room behind a closed door. Homey isn't designed as alarm. Maybe it can communicate with your alarm equipment but don't expect much more than that.
-
It works again, maybe triggered twice, have to look at it why I got 2 push msg.
-
thayoung1 said: I did change the trigger card (saw that begin / end was removed). Let's test it together in a couple of hours Yesterday evening and this morning where working already . Will let you know in one hour.
-
Although record and replay is done sometimes for IR afaik it is much more complex for the many different implementations of RF 433 MHz as I understood. As you see enabling many different 433 protocols on fe the RFXcom decreases the sensitivity / ra…
-
@Athom @Emile Will Athom develop an flic.io app for Homey, or do they work by default because of a generic BT profile?
-
BasVanDenBosch said: They probably are really different... Kaku is a brand indeed which uses it's own protocol over 433 MHZ Really different?? I bought mine HEs approximately 7? Year's ago at the karwei, they where the standard at that…
-
HomeEasy isn't compatible with the KAKU protocol. I have also 8 HE sockets, a dimmer and several remotes. At this moment they don't work with Homey, only work with my Domoticz/ RFXCOM . I see them also as a different protocol in the RFX manager. A…
-
KoenMartens said: Alternatively, you could use a 'dummy' device in the IF column (i.e. an IR signal you never use, a variable that's always on '1', and then call the flow from another flow. The variable-solution of @caseda is a little more fle…
-
@HansieNL Where did you get .35 ???? Did I miss something?
-
Site is back already....
-
@mbalik79 the examples of @caseda are using the original logic cards of Homey. You can use these as {{$variabelname}} . The Better Logic variables you use don't work as replaceable text.
-
If Alice shares a taxi with you she calls herself Juliette https://splytapp.com/nl_BE/ But she has a busy job [....] linke removed because picture is removed.
-
Yes publish the beta asap, but don't forget to communicate it! Use the blog , email and explain why and when.
-
btwvince said: @Emile I know there was a problem with the scroll bar in the Then column. But now i have many flows running and now I have to set my zoom level of Chrome to 50% to see all my flows. Will there be a scroll bar added in the next v…