This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Fire69
About
- Username
- Fire69
- Joined
- -
- Visits
- 3,304
- Last Active
- Roles
- Member
Comments
-
I would start by throwing away all the KaKu stuff and replace it with Z-wave That's just based on what I see on the forum here, I don't have any KaKu equipment, but see people complaining about 433Mhz stuff in general...
-
Have you already created a variable in the Better Logic settings?
-
caseda said: @Fire69 then your kids lack learning skills if not used daily (or just still young) Both caseda said: and true that for not much to change, just switch the switch out for a toggle switch then you won't have the pr…
-
caseda said: So i think it's your module itself that loses it's parameter(s), maybe you can try to change any of the other settings and see if they revert back in due time to it original state, if it does, you can almost say for certain it's the m…
-
caseda said: whoo, i feel special now. i don't think @Eternity's issue is the same issue, it's more that homey's z-wave chip lost the connection to FGS-222, most of the time will fix itself in time or reboot. but if this is the issue (at le…
-
Glad to see it's working better now! You can join Athom at Slack, you can get info/ask questions/have some fun there https://developers.athom.com/slack/ Or search the forum here, but don't use the search, it sucks... Instead, go to google and us…
-
I had the same problem with a FGS-212. Apparently the switch type gets reset from pulse to toggle... I've had it happen twice this week. Maybe something @caseda can have a look at?
-
I hope you don't take it wrong when I say this, but isn't it a bit stupid to use interpunction in voice commands? There's no intelligence here, he just listens for certain words... Whether your voice command would be 'can you turn on the lights plea…
-
If you have access to Slack: https://athomcommunity.slack.com/archives/general/p1476962706014027 In short, your apps cache as much as they can. When extra memory is needed, it's freed.
-
I don't think there's a way to open it without breaking the casing...
-
Can you show what you did?
-
RobinVanKekem said: Or, to add alternative suggestion, when clicking on a card it should open up the according Insights log. I would prefer this to be an extra icon then, like the wrench. I think opening the card is the most used functio…
-
Always is dangerous to say. Under normal conditions it should.
-
JeroenVollenbrock said: Starting with 0.10.5, Homey now unloads all apps (without disableing them) before an update is downloaded. If something goes wrong while downloading the update, this apps remain unloaded. I'll create an issue to see what…
-
satbopper said: i should point you to the latest feature of memory on the 10.7 firmware,i have 19 apps running and 23 mb free,what will happen if the memory is full Did you read the comment Jeroen made about this on Slack? You're mem…
-
I've been thinking this too since the beginning! It's really annoying having to click the little icon just to turn on/off a light. Just leave the wrench to open the settings and let us click the entire card to open it.
-
Have you unplugged it and tried again? Purple means it's in update mode, which it shouldn't be in. Don't hold it upside down when you plug it in https://www.athom.com/en/support/KB000009/
-
TheoDeKoning said: JeroenVollenbrock Added a Memory Usage bar under Settings > System ?????? Is all in 0.10.3 There's a difference between memory and storage
-
Eternity said: Yesterday I noticed that - after initiating my Kodi setup via Homey - I get asked which film I would like to play. That is new to me, and not wanted... How do I switch this off? Fire69 said: All on/off or sele…
-
That's pretty logical, since it was still connected to your Homey's old z-wave network (that didn't exist anymore). If you have more devices than just the motion sensor, you had to do it with all those devices.
-
JaapPelt said: You just happen to have a very awesome wife ;-) I sure do! Just don't tell her that.
-
I wouldn't mind a new cable either. Sometimes, when I move it around for some testing and I put it back on it's place it still tips over, although I've bent the cable numerous times already...
-
JeroenKleijn said: If you want to keep your homey, you'll have to work for it. You guys need new wives! We lived 2 years in a house with no light switches, just holes in the wall and 2 LivingWhites remotes on the table. Just because i…
-
JeroenVollenbrock said: Sommo said: JeroenVollenbrock said: Homey v0.10.5 has been released to the experimental channel. This release is scheduled to become the new stable version tomorrow. Could it possible to get to …
-
Mine likes it, because she doesn't have to use it It makes her life easier by doing stuff automatically, that's all that matters to her
-
hnijveen said: @caseda the latest for app and firmware (1.06.16 & 0.10.5) @Fire69 amazing, but good to know. I did a reset of the dimmer (hold B button until led is yellow followed by 1 click) the dimmer's led was green after calibration w…
-
Maybe some old devices that have been deleted already?
-
hnijveen said: Although I was able to add several Fibaro devices, I have no luck with the Dimmer 2. The pairing times out all the time adding the Dimmer 2. The distance between Homey - Dimmer 2 is very short, 15 - 20 cm. Any ideas? Jus…
-
You're on Apple right? https://github.com/Pash-Project/Pash Don't know it, so can't say if it will run
-
hnijveen said: hnijveen said: Great update! I do have a question: Where did my 20+ flows go? OK, emailed support@athom.com. Unfortunately they had never seen this behaviour before but will investigate further. For myself, I h…