This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
DaneeDeKruyff
About
- Username
- DaneeDeKruyff
- Joined
- -
- Visits
- 5,493
- Last Active
- Roles
- Member
Comments
-
@larsmachiels Being able to manage all sensors from one place is definitely a big plus and a nice addition to the app. Adding them in a usable way to the settings page isn't that hard. (In fact for as far as I can test it with only a flood sensor i…
-
@cautje I think you're using the wrong card. The Deactiveer Alarm card is to well, deactivate the alarm state. It does not change anything in the Surveillance Mode state. For that you need to use the flow card Set Surveillance Mode (Stel Toezicht …
-
I'll put it on the list, adding the code would not be to hard, but I can't test it myself as I don't own such devices.
-
Thanks guys. @larsmachiels @ThijsDeJong Adding more sensors is possible, there are enough alarm types exposed by Homey like alarm_smoke, alarm_fire and alarm_heat. But also others like alarm_co, alarm_co2 etc. How would you see the addition of th…
-
Thanks, that was indeed my goal to accomplish.
-
The app has been approved as beta and is now available without invitation. New forum topic here: https://forum.athom.com/discussion/4514 Thanks to all who participated in the alpha test!
-
Current version 1.0.16 * Support for non-sensor devices with Contact, Motion and Tamper capabilities Previous version 1.0.15 * Added 'Alarm State' condition flow card Previous version 1.0.14 * Minor translation fixes Previous version 1.0.13…
-
No problem, thanks for informing.
-
New version pushed: Version 0.0.14 * Added alarm state indicator to Alarm Off Button If there are no issues this version will be submitted for approval and will become the public beta version.
-
@Seraphim Hello Andreas, There is no limit in my code. The code just asks homey for all devices and cycles through the list looking for devices that have an alarm_motion (and alarm_contact) capability. What brand/type sensors are we talking abou…
-
Just published a new version: Version 0.0.13 * Replaced Surveillance Mode device with new one that has the same functionality minus the trigger and condition flow cards * Fixed greyed-out 'Deactivate alarm button' (Needs removing and adding of the…
-
The name is indeed inspired by the Thor movies an mythology. I didn't want to call the app 'Alarm' as I don't think Homey can be trusted on as an alarm system (it's missing some vital functionality for that) And it may be a bit of a Dutch thing, a …
-
@martijns Thanks, I had all those manual creative solutions too and that motivated me to write this app. @skandshus The 'delay' is meant to give you the time to either leave (when arming) or enter (to disarm) your house. Imagine you have a keypa…
-
No problem, glad it still works
-
@Seraphim Hello Andreas, The trigger card that gets triggered on an alarm has not changed and should work as before, for me it still looks like this: Do you still have that card in your flow? What happens when you delete the card and add it aga…
-
Pushed a new version: Version 0.0.12 * Added triggercard that fires when the Surveillance Mode changes. * Added conditioncard to check Surveillance Mode. * Due to the adding of the Arming Delay in 0.0.11 the flowcards on the Surveillance Mode d…
-
@skandshus I can give you access but do want to point out that this is an alpha version. At this moment it seems to be stable but I will keep developing and may make braking changes. If you want to use it, you will at least have to disable automatic…
-
I'm not yet sure when I'll submit it to the app store. Due to the addition of the arming delay the default trigger and condition cards on the device that is used to set the Surveillance Mode are not representative for the actual Surveillance Mode …
-
Pushed the new version to the app store: Version 0.0.11 * Added 'Arming Delay'. * Added triggercard that gets fired every second during the arming delay.
-
Added the arming delay: It works as desired: If you Arm and Disarm within the delay the Surveillance Mode will stay disarmed: It has one trade off though, since the 'The state changed' trigger card is connected to the device it does get trig…
-
@larsmachiels @rockhoppers You've convinced me I'll put it on the list (and after that the trigger card for the countdown that starts when the Surveillance Mode is activated with a delay )
-
@konradwalsh thanks for the feedback!
-
@swttt I guess @konradwalsh means a plugin where you can enter a pin and when the pin is correct you get access to a device that has the homealarm_state capability. (I'd like that too you know )
-
en de draden sluit je aan op...? het is de z-wave technologie die het duur maakt, niet de reed switch. Een andere optie is zigbee: https://www.gearbest.com/access-control/pp_626703.html?vip=2576119&gclid=EAIaIQobChMIkcuY_I-_2AIVirftCh2brgXOEAAYA…
-
Just pushed a new version to the app store version 0.0.10 * Added triggercard that gets fired every second during a delayed trigger. * Added more Dutch translations * Added Alarm Off Button (1st version, functional but needs UX improvement) * Adde…
-
larsmachiels said: I am replacing my existing alarm flows and see that at the moment the state is changed from disarmed into fully/partially armed this immediately goes into effect. In my opinion it would be better to take the trigger delay int…
-
@rockhoppers Good to hear it's working as you want it to work, thanks for the feedback!
-
@rockhoppers Well, fast I think. Moving to 0.0.9 was a big change with a considerable impact on existing installations but I've received no bug reports so I guess it's working ok. If all stays like this I'll probably release the next version tomorr…
-
I indeed mean a view that is configured on an iPad and can be used on an iPhone. That way there’s no need to make editing available on a phone but it does require a method to get the dashboard to the phone.
-
swttt said: What do you guys think: Remove the dashboard from phone view? Or just show a list that can't be ordered without drag and drop? Couldn't a view be copied/inherited from a tablet device that's in use by the same user.