This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
DaneeDeKruyff
About
- Username
- DaneeDeKruyff
- Joined
- -
- Visits
- 5,493
- Last Active
- Roles
- Member
Comments
-
New version is published: Version 1.0.4 * Arming delay selectable per Surveillance Mode New setting: Please select the desired option(s) @vaderag
-
Lodewijk said: What are you using here to alert you to turn of the alarm when you come home yourself? In the early days I had an alarm system were the keypad was making a beep to tell me the alarm is turned on and has to be turned of. Ma…
-
Lodewijk said: DaneeDeKruyff said: Lodewijk said: First of all great work in making this app. I'm a newbe at homey, but this one is getting my working done easier. I do have a question about my Philio 4 in 1 sensor (D-B-T-L). …
-
Lodewijk said: First of all great work in making this app. I'm a newbe at homey, but this one is getting my working done easier. I do have a question about my Philio 4 in 1 sensor (D-B-T-L). I use this on the front door and wanted it to trigger…
-
@vaderag Not in the current 1.0.3 but I've just submitted 1.0.4 for approval where you can select the delay per Surveillance Mode:
-
@dreamerbb I may have an idea what’s causing this, I’ll look into it. Could you please post the type/model number of the sensor?
-
For your convenience: https://github.com/athombv/homey/issues/2270
-
@deedje If the 'The alarm is activated' card is triggered on a sensor while you're in the Surveillance Mode Partially Armed when you don’t want that, I suggest you remove the Partial monitor for that particular sensor. The intended use of the 2 (ar…
-
New version published: Version 1.0.3 * Cancel actions on tripped sensor when Alarm state is active * Code cleanup * Minor translation fixes From this version on triggering of a sensor while the Alarm state is active will only result in writing t…
-
@meyo084 I've just tried installing version 1.0.2 and got the same error while this version was working earlier. Version 1.0.3 was approved and waiting to be published so I published this one and promoted it to stable and I'm able to install that on…
-
Due to a problem in the app store the app is currently unavailable, I've informed Athom about this.
-
rickp said: DaneeDeKruyff said: @rickp I've put your log in a table to make it readable: Line 1 is not relevant for your question. Line 2 is the first tripped sensor Line 3 is starting the countdown towards the alarm state becaus…
-
@lubbertkramer Yes, that's under construction. We've discussed on how it will be build and are working on getting it all together and prepare it for a test in a controlled test group. I can't really give an ETA on that, the hardest thing we're facin…
-
New version is published: Version 1.0.2 β * Added pre-arming check This version adds the pre-arm check. When you set the Surveillance Mode to Armed or Partially Armed Heimdall will check the sensors selected for that mode and will inform you if …
-
No this is not possible. At this time I only support the alarm_motion and alarm_contact capabilities in Homey. If someone would create a virtual device that has the alarm_motion capability and you would be able to trigger it from a flow it would be…
-
vaderag said: vaderag said: Turn on Alarm is a Better Logic variable which is also linked to a device. That device is flipped via Alexa. It seems that removing the conditions has solved that issue, so think it works now Very nice ap…
-
Ok, valid point, I'll look into it. I've created an issue for it on github: https://github.com/daneedk/com.uc.heimdall/issues/13
-
You can actually just use the flowcard 'Set Surveillance Mode' disarmed during a delayed arming, that will cancel the arming action. So, remove the condition cards in the flow with the NFC a 'tag has been detected' and try it again. I'm not sure ho…
-
How did you set the Surveillance Mode that started the countdown? Can you post screenshots of your flows?
-
@rickp I've put your log in a table to make it readable: Line 1 is not relevant for your question. Line 2 is the first tripped sensor Line 3 is starting the countdown towards the alarm state because of line 2 Line 4 is the first time the keuken …
-
rickp said: Also, when the delayed trigger starts and it triggers a flow, a second trigger will restart the already triggerd flows. I would be better of with just 1 activation, en then only again after pushing the "off" button or disarming com…
-
rickp said: Thats great! will add it as soon as the update comes through! I'm rebuilding my alarm at the moment. I noticed the following recently; When i use a trigger delay of eg. 20 and the alarm is triggerd the countdown starts. If i star…
-
@marinder What are you trying to achieve? If you want to use Homey as an alarm system, may I suggest looking at Heimdall: https://forum.athom.com/discussion/4514/app-heimdall-let-homey-watch-over-your-home/p1
-
New version with pre-arming check has been submitted to the app store: Options to enable the pre-arming check per sensor type Speech options Let Homey tell you when: Flowcard When a sensor is active at arming it will also be logged to the histo…
-
It doesn't do a beep from it self, but you can do a spoken countdown: (ignore those last 2 for now, this is not released yet) Or create your own flow with any of the cards that gets triggered every second during the countdown (towards arming or t…
-
@vaderag The workflow you describe is possible in Heimdall. The countdown possibilities (and more) are mentioned in the opening post here: Heimdall: https://forum.athom.com/discussion/4514/app-heimdall-let-homey-watch-over-your-home/p1
-
New version (just an incremented version number) is submitted and approved.
-
Just got it confirmed, it's a bit of an odd situation, when you want to upgrade from a beta to a newly published stable it is said you loose your settings, although I can't confirm you will. When a beta is promoted to stable you will not loose your …
-
I've just installed from the app store, was running an unpublished beta version which was installed using developers tools and I didn't get such a dialog and all settings and flows are still Ok. I'm not sure why you get that dialog, perhaps it's be…
-
Heimdall has left Beta; new version is just published. Version 1.0.0 * No functional changes, previous beta promoted to stable Just a little code cleanup, functional it's the same as version 0.1.11 Beta.