This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
DaneeDeKruyff
About
- Username
- DaneeDeKruyff
- Joined
- -
- Visits
- 5,493
- Last Active
- Roles
- Member
Comments
-
Maybe @caseda aka the zwave wizard can help?
-
Does that mean that using homebridge plugins would be possible? Like this for example: https://github.com/matthijs2704/homebridge-thinkingcleaner/blob/master/index.js
-
Aeotec recessed doorsensor @ € 39,94 https://www.amazon.de/Aeotec-Einbau-Tür-Sensor-ZW089-C-Z-Wave-Plus/dp/B00SX9WGWK/ref=lh_ni_t?ie=UTF8&psc=1&smid=A3JWKAKR8XB7XF
-
Good to hear @swttt
-
Yes, that sure sounds like a bug, didn’t get that when reading your post.
-
I personaly wouldn’t consider this a bug, but more as a nice feature. Imagine you are working with states (based on time or whatever) and on a state change (day to night perhaps or when you go to bed) you change the dim levels for some lights to a …
-
Another option for the spots would be the Osram Lightify GU10. I've got the connected to my hue system, but they can be directly connected to homey. Just keep an eye on amazon.de (use camelcamelcamel.com) and you can get them for around 20 euros/pie…
-
ingmar said: bvdbos said: You're think to complicated, like @Oy194 and @DanneDeKruyff say works to best.... Or, to give another solution, why not the other way around, after light turned off, set brightness to 100%. Setting bri…
-
Does the connected switch trigger a flow? I'd say make a flow that triggers on the light switching on and evaluate the time, between 5 AM and 10 PM set dimlevel to 100% Imo setting a dimlevel should not turn a light on, that way the dimlevel can be…
-
@HarmLutjeboer Try deleting the Toon device and disabling/enabling the app and then adding it again. Isn't a real fix but it is lesser work than removing and adding it again. For me it works, kinda curious if it would for others too. (Because imo if…
-
Always check amazon.de! https://www.amazon.de/Steinel-Außenleuchte-Hochfrequenz-Bewegungssensor-671310/dp/B0090ABOKQ/ref=sr_1_1?ie=UTF8&qid=1504889524&sr=8-1&keywords=STEINEL+L810 And if you don't need the stuff right now, use camelcamel…
-
I have a fibaro dimmer inside an outdoor junction box in a covered terrace and I had no problems with it last winter. It's mounted in the back of the garden, far from radiated heat from my house and it operated without any problems in temperatures …
-
Thats not the best way to get what you want. Best is to make a flow that triggers on movement and evaluate the lux value at that time. Remember though, if the lux value of the sensor is changing when your light is on you will have to store the lux …
-
I remembered the lampstealer program, but it seems thats depreciated but there is a replacement made by the Philips team. I wonder what would happen if you'd try to use that process and instead of linking the lamp to a hue bridge straigth to homey. …
-
@swttt as a solution for not being able to connect if a lamp is connected to a no longer available homey right? If you have an original hue bridge you can use that method to pair them with that bridge even though they are paired with a different co…
-
Amelsfort said: ....and just reconnect it once in a while for the updates? Yes, for this purpose it's handy to buy a starterpack including the bridge. There is a way to reset bulbs, there was a discussion about it on slack. If I remember…
-
Sir_Ray said: GeurtDijker said: Sir_Ray said: The system time is OK now after changing it the way described above, however, the Z-Wave logging is still using the time with an offset of 2 hours... Correct, zwave and oth…
-
One important note, the given location is in Amsterdam and will get you the correct timezone for Holland and most of Europe but if you want to use presence detection you're better of filling in your actual latitude and longitude.
-
swttt said: Read-only for a switch seems something that could be implemented in the core as a setting i guess. Worth a github feature request Would even be better when it would be implemented as an action card. In this use case: Washi…
-
https://trello.com/c/8FEFTqr8
-
https://trello.com/c/oizzqmGi It's on the list, give it your votes.
-
Well, I'm sorry for having such high standards. Thats just what I'm used to from others I buy products from and the company I work for. And Bas, you yourself do find time to post information on the progress you make even for something that is not a…
-
+1 If you make a promise you can't keep, even not a hard one, it's so little effort to keep the people you promised happy by informing them.
-
Great work @swttt I am wondering how bad the 7 to 14 % cpu usage actualy is. I mean it may be a lot compaired to other apps, but it is still not much compared to what is available. Ok, it will generate more heat but I don't think that will be an is…
-
Indeed, seeing the footprint each app has and is a tick up the counter towards the 15 before that nice message appears it's a good thing this is made core functionality. Personaly I'd like to see Athom integrate Better Logic and Countdown for that r…
-
So, reason 4 it is. Great job @swttt
-
@bschoppi What address do you use to connect to your homey? Can you post the url here?
-
Absolutely. You can just download Apple Configurator 2 to your Mac and play around with a new profile to see what can be done, you don't need an iDevice connected when playing with it.
-
Easy, make it work on an iPad, use the Apple Configurator 2 to make it supervised. Put it in kiosk mode and allow only safari, add homeydash to the whitelist and block all other urls. And get an QI pad to plug unto the iPad ofc.
-
swttt said: A few reasons actually: 1. It isnt finished, settings page is missing for the bearer token and set the interval of checks. 2. I kinda lack the time to really maintain this (cant do serious feature requests etc.) 3. I would like to r…