This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
DIYglenn
About
- Username
- DIYglenn
- Joined
- Visits
- 137
- Last Active
- Roles
- Member
Comments
-
Fixed by pulling power, reboot did not fix it.
-
Damn... Went to redo this, start over again, but now the scripts doesn't work... /api/manager/microcontroller/record?_=1523900784873 Failed to load resource: the server responded with a status of 500 (Internal Server Error)
-
Thanks! That seems more correct. This means than words should be defined the other way around? Or doesn't it matter? I mean, it starts with number [1408, 546] so this would be word1? And [462, 1322] would be word2? Does this order matter? I guess o…
-
I didn't know what to write as SOF, as it is the same as one of the words, but it's still only once at the beginning, so I guess that is a SOF signal?... So I set SOF and EOF to "2" and then "predictedWords" as follows: var predictedWords = [[400, …
-
...So my signal only has two words? Why are there 50 signals then? I'm not sure I get how to convert this to anything useful, what exactly does it mean if something can be "parsed" or not? (Reading the PDF)
-
Thanks for your help, and sorry for not replying back earlier. I'll see if I can work my brain around this. Coding is new for me, not to mention decoding 433MHz signals. One question though; What do you mean when you say that the values "will lead…
-
Out from my previous post, I can't see any SOF, but is 49 considered EOF or a word?
-
So I used the method you linked to, and while it seemed harder to begin with (compared to clicking a button), this gives me a perfectly sorted list instead. (Are they (Athom) really going to remove the Mac/PC app?! I don't like the new iPhone app, …
-
Thanks. I find it a bit hard still though, I'm not sure exactly what values I'm looking for, or how to convert the signal to integer or binary. I used the signal tool and held the lock button, and then recorded again when I held unlock and now got …
-
Man... Yeah, I've lost all signals at the moment, so waiting for that update. Will be nice to get temps from my rooms again. It's summer now, so all heaters are disconnected anyways.
-
Same here, downloaded the VCD and opened in GTKwave, but it's blank, even though the raw file has a lot of data (some junk probably). Edit: Figured it out, needed to click "Insert". Well... How do I go from here?
-
I tried recording 433MHz. First I saved a VCD when I did nothing, and did get a lot of data anyways (probably a lot of 433MHz transmitters in the building). Then I tried with pressing the remote maybe 10 times, and did get loads of data. Tried again…
-
Need to look into this myself. I’m messing around with a linear actuator and a 433 MHz latching relay controller (relay A/B switching to invert voltage). Even though I could easily control with Arduino or ESP8266, I’d like to see if I can create an…
-
Wow, that is dangerous!! What if I were to use those sensors to control my heaters?! I was mainly purchasing Homey because of the 433 support, so I hope this will be fixed, and hopefully get a good signal in the future.
-
I checked the date, and it's an hour off?... Edit: I opened the localization map, set my localization a bit to the left, and back again (like to the neighbor and back) and Homey flashed an orange light and set the time right. I find this very st…
-
No, it didn’t work tonight either... will check tomorrow.
-
Delete
-
I couldn’t check, because I couldn’t log in. I’ll keep an eye on it for the next few days to see if the reboot has fixed it.
-
The reason for instability is that it isn't running flows on morning/evenings like it did before. It seems to have changed the last week. I haven't had any issues before, but now I had to disconnect the power and reconnect just to get it to show up …
-
I tried again, and this time I watched the blue LED ring, and when it finished the app was installed, but I did get the same error as before. Installing MQTT Client worked fine.
-
Very interesting. I would love to see this supported by Homey. But I haven't actually seen this product in use anywhere, maybe it needs to really hit the market first.
-
Is there an answer from the devs on this one? I mean, it should do this every nnnn seconds, so why does it have to be done manually? Is this for all battery driven sensors from Fibaro? All Z-wave devices in general? As I’m understanding it, instea…
-
KikkerX10 said: The SA-33 can be connected via the Alecto app. I recently connected 3 SA-33 individual to Homey as a test. Not used the master slave connection of the SA-33.) Had only time to test the range of 1 SA-33 and the range was not that…
-
tb1962 said: @DIYglenn I do not own these smoke-detectors but i think you can't connect them to Homey. As far as i can see these smoke-detectors use a closed system to connect between master and slave But they are listed under the "…
-
I’m experiencing the same problem, I cannot turn off the LEDs on Motion Sensor. The link is to github, and it is closed... I didn’t quite get what was the origin of the problem, and how to permanently fix it?
-
Hmm, I guess I missed that. It seems to be working fine with 66% now, and the wattage used corresponds with the bulbs (4x5,5W). Setting it to 55% as the auto-calibration did would lower it to 17-18W.
-
It seems like any value over 66% will turn the light off and on... I don't understand why? Shouldn't it be 100%?
-
I was thinking of using experimental, but at least for me it warned me that I could not switch back without resetting everything, so - no thank you.
-
ramonkampinga said: Is there anybody interested in extending this app with the updated API of Neato and integration with the new D5 and D3 models? I tried it myself but since I am not a developer a little to advanced for me - got to the point w…