This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Count_B
About
- Username
- Count_B
- Joined
- Visits
- 617
- Last Active
- Roles
- Member
Comments
-
I think the problem is that when you have added the app and change the IP address it doesn't work anymore. When I deleted the app, installed it again and configure it with the new IP address everything works!
-
When I try to confgure Kodi (installed on Nvidia Shield) I get this error: Any ideas?
-
I have added a geofence on my first phone and it is synchronized in homey (Http broker). But the geofence isn't added to the second phone when it sends it's location to homey. Any ideas?
-
Most of the features are already there with some configuration. For example, you can trigger a flow when a "Motion alarm, door/window open, fire alarm, smoke alarm, CO2 alarm, water flooding, etc" goes off ;-)
-
Mine is also working, but only in 40% of all times when I trigger a flow where the infrared is involved. I have a Samsung TV and I am using the Samsung TV ir beta remote app and the builtin infrared device. With both apps I have this issue.
-
I also have problems with infrared since the update. Most of the time it doesn't work anymore.... I have changed nothing only updated to the latest (stable version). Is this a bug that already has been reported?
-
Does somebody know how I set chrome/safari to full screen in IOS 11 on a Ipad? Edit: I have installed this browser and now it is working great! Link: https://itunes.apple.com/nl/app/full-screen-web-browser-app/id501940809?mt=8
-
If you have installed the Hue skill it works as you have described. I have you have configured homey to turn off/on the lights you must say "ask homey to turn on the lights." For this you must have a trigger off course.
-
Eternity said: Thanks @caseda. You are right; I just read that the dimmer has only 1 output! Excellent suggestion, I will check out the FGS-223 ! Do I interpret the manual that - with a momentary switch - I can set both S1 and S2 to On/Off bu…
-
Eternity said: @Count_B No. But you can create a trigger with the Better Logic App and have that start a Hue scene. Those triggers can be added to Homey Dash. Here a screen of my tablet. Almost all buttons are triggers (for Homey flows). The …
-
Here a little more specific. I have created 2 flows, see below: Now the first flow is working fine when I press the Bitlfip device on my mobile phone. The problem is that when I do a voice command the TV is turning on & off fine but the bitfl…
-
I have added a bitflip device, but when I change the variable to false or true in Homey it isn't changing on my android app. Any ideas?
-
caseda said: @Count_B yes there is, the "value changed" card triggers on all changes, including counting down, it has a tag with the value that you then can use in the AND column Thanks for your help I think I have it right now. I start…
-
Is it possible to activate a flow when the countdown app has 'x' seconds left? For example: [if] countdown has 5 seconds left, [then] ....
-
Is it possible to select Hue scenes in the Homeydash?
-
caseda said: @Count_B why not use the countdown app? 1: [if] motion [and] alarm is on [then] countdown to 10 (and just don't use messages... You know you have an alarm right? You don't want to let the burglar know) 2: [if] deactivate alarm [a…
-
After some struggling I think I have it made it work to interrupt the alarm within the specified time: Any tips or suggestions to use less flows to have the same results?
-
I created these 2 flows: Flow1 Flow2 Now when the motion alarm is raised I turn the virtual device off within the 60 sec. time limt (so flow2 will never be executed). The problem is that the messages still are played in flow1. How can I change…
-
Maybe a noob question but what is the difference between a device & mode? If I choose a alarm as 'device' and movie as 'mode' I get 2 items that I can turn on and off. But I can't see any differences between these 2 items.
-
Dat kan je instellen in je homey. Daar heb je flow cards waarbij je kunt kiezen uit: 1x drukken, 2x drukken, 3x drukken, etc..
-
Any idea when the latest version arrives in de app store? I still can't edit my custom calendar.
-
Ik heb een Fibaro double switch. Met de linker schakelaar worden mijn tafellampen geschakeld (zoals een normale schakelaar doet) en met de rechter schakelaar heb ik verschillende scenario's geprogrammeerd in mijn homey als Film kijken, weggaan, agen…
-
I have installed Mosquitto on my Qnap and when I configure Owntracks on my android (Galaxy S8) it is working fine. But when I install Owntracks on another android device (Galaxy S5) it says that it is connected but I can't see this Galaxy S5 on my G…
-
I'm looking to replace my thermostats for Danfoss but can anyone confirm the issue with the E5 error is resolved?
-
When I activate a trigger via the android app it takes sometimes more then 5 seconds before the trigger is executed. Is this normal behaviour?
-
When is the latest update for this app released in the homey app store?
-
Update: The flows that work with the S2 switch: Lang ingedrukt (Kortstondige schakelaar) Lang ingedrukt los (Kortstondige schakelaar) Flows that doesn't work: 1x ingedrukt/geschakeld 2x ingedrukt/geschakeld 3x ingedrukt/geschakeld
-
I may have found a bug. When I change the setting to "Tuimelschakelaar" in the device seetings then the S2 switch works but I get 2 times the message "this is a test" (that makes sense off course). When I change the the setting to "Kortstondige scha…
-
caseda said: @Count_B s2 is functioning with its scene activation (so: single, double, triple press/switch; hold and released) I have re-added the fibaro switch but still it doesn't respond when I press the S2 switch. I have created a s…
-
caseda said: @Count_B ah that explains it, it only works in the latest homey version (1.1.x) not in previous versions as something changed in the z-wave core for this. sorry only experimental at the moment @HansieNL i found the issue and am …