This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
The Homey Community has been moved to https://community.athom.com.
This forum is now read-only for archive purposes.
Amelsfort
About
- Username
- Amelsfort
- Joined
- Visits
- 1,134
- Last Active
- Roles
- Member
Comments
-
Rocodamelshe said: Ok, here we go. Download the Better Logic app. Download the Countdown app. In the Better Logic (BL) app make a variable, choose boolean and name it Deurbel (in my case it is Deurbel, name it whatever u like). In the Countdow…
-
The sensor is standing next to Homey, so I suppose the network would be ok. I also have some wall plugs in the same room as well. I'm not sure what settings would be of influence for this issie. It looks more of an issue in Homey or the app instead …
-
I do have the FGMS-001 ZW5, which is the Zwave+ version.
-
I'm not really sure, but I also think the issue would resolve itself. When I switched on the lights using the app, the same issue occured later on. Although I'm not sure if that was right after 15 minutes, which would mean it did detect some motion.…
-
The LED ring was just one example. I think it would be nice if more device cards had sort of a history. For example the hue lights. I can think or a flow which turns the lights to a bright color for a little while. Afterwards, the lights should swit…
-
I just found out my Homey was one hour off, so I checked the geek section. There I noticed no timezone was specified! Even after a reboot, Homey didn't show me a timezone and the time was still one hour off. [update] I just noticed when I set my lo…
-
I have just added two wall plugs to Homey and marked them as lamps. Switching them works fine, but there is no way to see the power consumption. I can see it for a third wall plug, which is not configured as a lamp. Why is this information not acces…
-
After I rebooted Homey, I was able to add two plugs without a problem. Only with the third I got a timeout again, but after resetting the plug, I could add that one as well.
-
Hold the button for a while until the plug turns yellow.
-
Still, even after the update to 1.0.1, Homey is unable to switch my candles on or off. It would be nice if Homey was able to turn them on before Christmas.
-
I think that could be done using the states (from the app State Control) where the alarm is only switched on when the state is not 'Holiday'. On the other hand: for the heating it would be great when Homey knows when you will come home so it can sta…
-
It seems that this issue is still not resolved: However, when I change the time requirement to 'later' (so it's 'false' now), the other checks are not performed. So it seems that only the time card is able to stop performing the other checks. Is th…
-
This should have been fixed in version 0.10.3, but yesterday my Homey was constantly reminding me to put the trash outside. Even though the trash is not collected until Thursday. So it seems there's still an issue with the checking of conditions. M…
-
It is working fine for other lights. Also when I change a BitFlip-device, Homey executes the flow correctly and turns on the lights. But then I was unable to switch one of them off using the app/device page.
-
I moved the light a bit further from the switch and the behaviour did change! Now I was unable to switch the light on with the app! Homey itself (automatically from a flow) was able to switch the light on! But this morning, the light was still on a…
-
If I remember correctly, 'activate flow' means the flow will just be enabled, but not started. So after switching the BitFlip-device, you would still have to say something. I think you should move the BitFlip-trigger to the upper flow and move the …
-
One of the lights is a LED-spot, so halogen is also not an issue here. But it's something I can also test!
-
That also works fine for the lights in the living room, but not for the ones in the garden. The only difference is the type of switch ('normal' ones in the living room and the outdoor types in the garden) and the distance.
-
I don't think a delay will fix this (I will try though), since this problem also occurs when I try to turn a single light off using the app. Ah, now I understand the idea. But I'm still wondering if that will work, since, when I use the app, I have …
-
Is it really a mesh network? Never knew that. I thought that was one of the advantages of zwave over KAKU. But I will try it today!
-
I updated to 0.10.3 without any problem, although I did see the 'no access'-message for a very short moment. After a refresh, I could access my Homey perfectly. The only thing I am wondering is how/when I can uncheck the 'Receive experimental updat…
-
I am also looking for some controllable RGB GU10-spots and found the Innr-spots. I was wondering if you also need a bridge, since they use Zigbee and Homey supports Zigbee directly.
-
I have played with IR yesterday and some things worked fine, while others didn't. I have added my Philips TV as a device and Homey is able to switch the TV on and off. This works fine. But I also have some IR-candles with a small remote (just on/off…
-
Not sure if this is an issue with the app, but my girlfriends phone is not available in the Homey flows. I have a flow sending a notification when someone comes home, but I can only select my own phone. I did create an account for my girlfriend and …
-
I also lost all my timers during the update to 0.9.3 and/or reboots of last week. I also got a red ring during the reboots, after the update, but that seemed to be resolved by rebooting a few more times. Some timers were probably running, but not al…
-
Coolblue has very cheap RGB WiFi-lights now: http://www.verlichtingcenter.nl/category/247766/smart-lampen.html?105886=91330 The only thing is the site mentions the need for a bridge, but I'm not sure if the lights can be controlled without a bridge.…
-
Yesterday I noticed the confirmation card wasn't working correctly. It did ask the question, but didn't respond to the answer. Even when I entered 'ja' using the speechinput-page. When I replaced the Better Voice-card with the standard one, my flow …
-
Hmm, that's a pity, although I see the logic in there. This means I have to add some more flows for the same thing.
-
@grazyfrog It's fixed now! Thanks! And the paper- and PMD-container was outside indeed, yesterday. Even though Homey reminded us the whole evening to put the other one outside for today, but that was probably because I didn't configure the app y…
-
@grazyfrog That's correct. GFT and 'Rest' are combined in one single, splitted container. It would be very hard to collect them separately. Same goes for PMD and Paper.