This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Official Z-Wave Aeotec

[App] Aeotec by Athom - main discussion topic

12345679»

Comments

  • Is there a way to get homey to recognize the "home energy meter gen5" ?
    Ive tried the master on github, but cant seem to get homey to recognize it.
  • I have found an Aeon device which measures two distinct  energy drains by two clamps

    it is a Gen5 version while the app specifies Gen2

    My question:
    Is the Homey Aeon app compatible with the new Aeotec Home Energy Meter Gen5?

    thanks a lot
  • Hi!
    I got my Homey a day ago switching out my Fibaro HC2.
    Any chance of getting support for Aeotec Micro Switch and Micro Iluminator?
    https://products.z-wavealliance.org/products/768
    https://products.z-wavealliance.org/products/765
  • EternityEternity Member
    edited July 2018
    One of my Aeotec Multisensor 6's is behaving strangely. I have excluded, updated the firmware and included my 5 Multisensors successfully. The fifth one is online in the z-wave developers mesh:



    It also excepts parameter changes, with giving an error message. But, it is seen as broken in the App/web interface:



    UPDATE

    It gets even spookier. In the android official Homey App, I get an 'broken' device too:



    However, the beta/preview, all is working fine:


  • I created a Github issue.
  • Any chance of getting support for Aeotec Water Sensor 6 (ZW122-C) and Aeotec Door/Window sensor Gen5 (ZW120-C) ?




  • rafirafi Member
    I posted in the comments section of the app.. but probably would be better to post here.

    I have a DSC18.

    I have gathered as much external info as I could.
    I have even created the svg.
    I have created a driver by copying what I saw in the DSC16 pull request.
    This allows for the switch to function but it is not yet reporting Watts

    Smart Switch Module Gen 2 Aeotec Micro Switch G2, or Micro Smart Switch G2.

    DSC18103 GEN3

    80-Send notifications (0=nothing 1=hail CC 2=basic CC report),1d,0
    134,
    3,
    18
     "manufacturerId": 134,
            "productTypeId": 3,
            "productId": 18,


     Useful info https://developers.athom.com/library/zwave/generator/ ID 767 http://products.z-wavealliance.org/products/767 https://aeotec.freshdesk.com/support/solutions/articles/6000165734-micro-switch-g2-technical-specifications- https://aeotec.freshdesk.com/support/solutions/articles/6000165733-micro-switch-g2-user-guide- sample data from 


    ZWAVE Console [ 2017-05-28T16:52:25.434Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T16:52:25.890Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T17:02:25.180Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T17:02:25.180Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T17:04:24.443Z] Node[77]: sendData to COMMAND_CLASS_BASIC, params 0x01ff [2017-05-28T17:04:25.182Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x0221740000f262 [2017-05-28T17:04:26.468Z] Node[77]: sendData to COMMAND_CLASS_BASIC, params 0x0100 [2017-05-28T17:04:28.179Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02217400000000


    Did you make it working? I have one of those sitting in my cupboard for over a year as it's not supported by the Homey app yet.
  • rafi said:
    I posted in the comments section of the app.. but probably would be better to post here.

    I have a DSC18.

    I have gathered as much external info as I could.
    I have even created the svg.
    I have created a driver by copying what I saw in the DSC16 pull request.
    This allows for the switch to function but it is not yet reporting Watts

    Smart Switch Module Gen 2 Aeotec Micro Switch G2, or Micro Smart Switch G2.

    DSC18103 GEN3

    80-Send notifications (0=nothing 1=hail CC 2=basic CC report),1d,0
    134,
    3,
    18
     "manufacturerId": 134,
            "productTypeId": 3,
            "productId": 18,


     Useful info https://developers.athom.com/library/zwave/generator/ ID 767 http://products.z-wavealliance.org/products/767 https://aeotec.freshdesk.com/support/solutions/articles/6000165734-micro-switch-g2-technical-specifications- https://aeotec.freshdesk.com/support/solutions/articles/6000165733-micro-switch-g2-user-guide- sample data from 


    ZWAVE Console [ 2017-05-28T16:52:25.434Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T16:52:25.890Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T17:02:25.180Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T17:02:25.180Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02216400000001025800000001 [2017-05-28T17:04:24.443Z] Node[77]: sendData to COMMAND_CLASS_BASIC, params 0x01ff [2017-05-28T17:04:25.182Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x0221740000f262 [2017-05-28T17:04:26.468Z] Node[77]: sendData to COMMAND_CLASS_BASIC, params 0x0100 [2017-05-28T17:04:28.179Z] Node[77]: Received application command for COMMAND_CLASS_METER, data: 0x02217400000000


    Did you make it working? I have one of those sitting in my cupboard for over a year as it's not supported by the Homey app yet.

    Was just about to ask about that one , had one I didn't use for a while and added it to homey now as a generic z-wave device, works on/off  nothing else. 
  • henrikrabithenrikrabit Unconfirmed, Member
    Could somebody please add support for DSC27103-ZWEU and DSB09104-ZWEU?
  • Could somebody please add support for DSC27103-ZWEU and DSB09104-ZWEU?
    Hi Henk,

    Request to Add support for NEW devices

    Request for support of new devices can be done in a Form: https://go.athom.com/request-device-support
    Depending on many factors (popularity, availability of API's and documentation , resources (time) needed, etc.) Athom will possibly add support cq create an App to support the requested devices.
Sign In or Register to comment.