This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Official

Homeyda.sh - Web based dashboard for Homey

16781012

Comments

  • KvMKvM Member
    edited March 2018
    Do you have it since the beginning or is there something broken? Or did you just started using it just like me?
  • KvM said:
    Do you have it since the beginning or is there something broken? Or did you just started using it just like me?
    to who are you asking this question?

  • KvMKvM Member
    Sorry, question for @Mecallie as he / she has the same problem
  • swtttswttt Member
    It could be something is broken indeed. The last update was a big rewrite to support the new quasar framework. Last week I have been moving homes, and finally got some decent internet again. 

    I’ll try to fix most bugs ASAP, and will look trough the GitHub issues and PR’s. Is there already an issue for this?
  • Looking great so far guys!!

    @koeniebert how did you manage to create the volumeslider and what device does it control?
  • EternityEternity Member
    edited March 2018
    Hope I can help you...

    How:
    - use Better Logic to create a num variable


    - Add the dim slider as a device in Homey



    - create a flow that looks like this, but your hifi/volume device in the THAN:




    Add the slider to Homey Dash:




    Good luck!





    PS
    For the Xiaomi Cube, I created a dimming slider to operate.  
    Here: https://forum.athom.com/discussion/4923/xiaomi-cube-zigbee-usability-options-how-to-discussion#latest
  • KvMKvM Member
    edited April 2018
    swttt said:
    It could be something is broken indeed. The last update was a big rewrite to support the new quasar framework. Last week I have been moving homes, and finally got some decent internet again. 

    I’ll try to fix most bugs ASAP, and will look trough the GitHub issues and PR’s. Is there already an issue for this?
    I just made an issue in github: https://github.com/swttt/HomeyDash/issues/85

    Can you post something on the forum as well if you find something? 
  • Eternity said:
    Hope I can help you...


    - create a flow that looks like this, but your hifi/volume device in the THAN:




    @Eternity thanks for helping out. I figured this was set up with Better Logic by creating a Numslide-device but can't get this to set the volume of neither my chromecast or hifi-set, guess they don't support setting the volume with a value...


  • Try to drop the tag from the tag drop down menu onto the volume. See my example, the blue tags are dropped onto the card. 
  • I have just made a request for a plugin on the Github. I know there are more guys around here that can make plugins for this great dashboard. So I share it here too. I hope it's possible, because it can boost the WAF. :) And if the WAF is high enough, I can finaly mount a tablet to hour livingroom wall.. :)

    You can find my request here in detail: https://github.com/swttt/HomeyDash/issues/86

    In short: I would love to display the value of a Homey 'tag' on the dashboard!

  • Eternity said:
    Try to drop the tag from the tag drop down menu onto the volume. See my example, the blue tags are dropped onto the card. 
    Tried this yesterday but didn't realise this was so fiddly, thanks again!
  • TallguyTallguy Member
    edited April 2018
    I can't get my Hikvision to work with this beautiful app :'-(

    I use this URL: rtsp://192.168.0.188:554/s1  I checked if it worked by using VLC and open a networkstream in it. After pasting this URL, I get the live view of my camera.
    But in the widget, all I get is something that looks like a broken link icon.
    Even when using username & password, this happens.

    Any ideas?
  • PhuturistPhuturist Member
    edited April 2018
    Tallguy said:
    I can't get my Hikvision to work with this beautiful app :'-(

    I use this URL: rtsp://192.168.0.188:554/s1  I checked if it worked by using VLC and open a networkstream in it. After pasting this URL, I get the live view of my camera.
    But in the widget, all I get is something that looks like a broken link icon.
    Even when using username & password, this happens.

    Any ideas?
    rtsp streams do not work within a browser without additional software (and therefor also do no work in HomeyDash). The stream has to use the MJPEG protocol. So try to find out if your Hikvision camera also has a MJPEG stream and use that.
  • TallguyTallguy Member
    edited April 2018
    Phuturist said:
    Tallguy said:
    I can't get my Hikvision to work with this beautiful app :'-(

    I use this URL: rtsp://192.168.0.188:554/s1  I checked if it worked by using VLC and open a networkstream in it. After pasting this URL, I get the live view of my camera.
    But in the widget, all I get is something that looks like a broken link icon.
    Even when using username & password, this happens.

    Any ideas?
    rtsp streams do not work within a browser without additional software (and therefor also do no work in HomeyDash). The stream has to use the MJPEG protocol. So try to find out if your Hikvision camera also has a MJPEG stream and use that.
    Ah, ok. I just changed my DS-2CD2032F-I to provide me with a MJPEG substream. Testing that in VLC player works. Time to give it another try :)

    EDIT: nope, stil nothing on my IPad. Any suggestions?
  • Tallguy said:
    Phuturist said:
    Tallguy said:
    I can't get my Hikvision to work with this beautiful app :'-(

    I use this URL: rtsp://192.168.0.188:554/s1  I checked if it worked by using VLC and open a networkstream in it. After pasting this URL, I get the live view of my camera.
    But in the widget, all I get is something that looks like a broken link icon.
    Even when using username & password, this happens.

    Any ideas?
    rtsp streams do not work within a browser without additional software (and therefor also do no work in HomeyDash). The stream has to use the MJPEG protocol. So try to find out if your Hikvision camera also has a MJPEG stream and use that.
    Ah, ok. I just changed my DS-2CD2032F-I to provide me with a MJPEG substream. Testing that in VLC player works. Time to give it another try :)

    EDIT: nope, stil nothing on my IPad. Any suggestions?
    What happens if you open the MJPEG stream directly in the browser?
  • Nothing, but...I might have to use a different account since the one i’m Using right now has an @ in the password. It might be that the app and browser doesn’t like that.
  • TallguyTallguy Member
    edited April 2018
    EDIT: nope, that doesn't work either. 

    This is what I entered in the settings: http://test:Toetsenbord@192.168.0.188/Streaming/channels/102/httppreview



    And this is the result


    This URL still work OK in both VLC Player, but also in any browser on the Ipad or PC (even though I have to authenticate again, but that's not important)
  • Tallguy said:
    EDIT: nope, that doesn't work either. 

    This is what I entered in the settings: http://test:Toetsenbord@192.168.0.188/Streaming/channels/102/httppreview



    And this is the result


    This URL still work OK in both VLC Player, but also in any browser on the Ipad or PC (even though I have to authenticate again, but that's not important)
    The way you are using http authentication (http://username:password@ip) is deprecated and not supported by browsers anymore. Either see if your device supports authentication with http parameters (something like http://ip?user=xxx&password=xxxx) or dont use http authentication. If your camera dont support these options you are screwed.
  • Question: can you change the icons on a ipad? It seems I am not able to save svg's locally so homeydash can't find them?
  • Roephoed said:
    Question: can you change the icons on a ipad? It seems I am not able to save svg's locally so homeydash can't find them?

    Put the files in icloud.
  • Maybe it's asked before, but I did a search and couldn't find any matches.
    First of all: Nice work!

    Trying to setup a dashboard, I have some questions. 
    To make my dash "Child & Wife Friendly"  :) I like to work with Toggle Switches. 
    The work as the should, but take a lot of space on the dashboard.
    • Is there a way to change the Fontsize?
    • Is there a way to change the Iconsize?
    • Is there a way to change the height of the icon?

  • htilburgs said:
    Maybe it's asked before, but I did a search and couldn't find any matches.
    First of all: Nice work!

    Trying to setup a dashboard, I have some questions. 
    To make my dash "Child & Wife Friendly"  :) I like to work with Toggle Switches. 
    The work as the should, but take a lot of space on the dashboard.
    • Is there a way to change the Fontsize?
    • Is there a way to change the Iconsize?
    • Is there a way to change the height of the icon?

    The toggle switches aren't working at the moment. But you can change the size when you add the widget.
  • Count_B said:
    htilburgs said:
    Maybe it's asked before, but I did a search and couldn't find any matches.
    First of all: Nice work!

    Trying to setup a dashboard, I have some questions. 
    To make my dash "Child & Wife Friendly"  :) I like to work with Toggle Switches. 
    The work as the should, but take a lot of space on the dashboard.
    • Is there a way to change the Fontsize?
    • Is there a way to change the Iconsize?
    • Is there a way to change the height of the icon?

    The toggle switches aren't working at the moment. But you can change the size when you add the widget.
    Which widget? I don’t understand what you meen. 
  • htilburgs said:
    Count_B said:
    htilburgs said:
    Maybe it's asked before, but I did a search and couldn't find any matches.
    First of all: Nice work!

    Trying to setup a dashboard, I have some questions. 
    To make my dash "Child & Wife Friendly"  :) I like to work with Toggle Switches. 
    The work as the should, but take a lot of space on the dashboard.
    • Is there a way to change the Fontsize?
    • Is there a way to change the Iconsize?
    • Is there a way to change the height of the icon?

    The toggle switches aren't working at the moment. But you can change the size when you add the widget.
    Which widget? I don’t understand what you meen. 
    If you add the widget "Toggle Button" you can resize and change the icon in the settings of the widget. But again the toggle switches are not working at the moment ;-)
  • They work for me? After a sleep of my laptop I just have to refresh the page to get them to work again.
  • Count_B said:
    htilburgs said:
    Count_B said:
    htilburgs said:
    Maybe it's asked before, but I did a search and couldn't find any matches.
    First of all: Nice work!

    Trying to setup a dashboard, I have some questions. 
    To make my dash "Child & Wife Friendly"  :) I like to work with Toggle Switches. 
    The work as the should, but take a lot of space on the dashboard.
    • Is there a way to change the Fontsize?
    • Is there a way to change the Iconsize?
    • Is there a way to change the height of the icon?

    The toggle switches aren't working at the moment. But you can change the size when you add the widget.
    Which widget? I don’t understand what you meen. 
    If you add the widget "Toggle Button" you can resize and change the icon in the settings of the widget. But again the toggle switches are not working at the moment ;-)
    The toggle widget was fixed about 2 weeks ago. If they do not work for you first try to clear your local cache and re-add them. If that does not solve the problem I'd be interested in what hardware you are using.

    I'll see if I can implement a setting for changing the font size.
  • JaxcJaxc Member
    edited April 2018
    What browser can i use, for an iPad, to use fullscreen, and get homeyda.sh working ok. 
    Safari and chrome do not support full-screen for me..
  • swtttswttt Member
    You need to pin them to the homescreen, then they are full screen.
  • Should the toggle buttons state be refreshed automatically, when the state changes from an other source (like Homey itself)? 
  • m1ckem1cke Member
    swttt said:
    You need to pin them to the homescreen, then they are full screen.
    And then forced to portraitmode on my tablet.. in a chrometab landscape works.. strange..

Sign In or Register to comment.