This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Official

[App] Greenwave Systems by Athom - main discussion topic

12346»

Comments

  • I bought them from vesternet. Im using a mac (so safari so I'm not sure theres any chrome extensions to disable). They have them on offer at the moment (I assume as they are not being made anymore) however given they're already a supported product I would expect them to work still. 

    homey and the plug are about 12 inches apart (tried at distance of about 4m first then closer) the initial detection etc is instant so no signal issues. Its just like homey locks up during the process and resets itself. Ill get picture of the actual item... no idea what version it is.....

    My homey seems to have gone flaky since I put the app on, the management interface is slow, goes black sometimes as if the app is struggling to communicate with homey. Heres the logs on zwave after I just tried to add it ... after about 4 mins homey app comes up homey not responding and the device starts flashing with a green circle of lights. and Homeys devices page in the app has my rooms but they're all empty (all devices missing)

    2017-10-27T15:41:52.602Z] Command[312] start: getNetworkTopology
    [2017-10-27T15:41:52.748Z] Command[312] end: getNetworkTopology
    [2017-10-27T15:42:32.953Z] Command[313] start: addNode
    [2017-10-27T15:42:32.967Z] Command[313] status: addNode, status: ADD_NODE_STATUS_LEARN_READY
    [2017-10-27T15:42:40.976Z] Command[313] status: addNode, status: ADD_NODE_STATUS_NODE_FOUND
    [2017-10-27T15:42:41.369Z] Command[313] status: addNode, status: ADD_NODE_STATUS_ADDING_SLAVE
    [2017-10-27T15:42:41.471Z] Command[313] status: addNode, status: ADD_NODE_STATUS_PROTOCOL_DONE
    [2017-10-27T15:42:41.530Z] Command[313] status: addNode, status: ADD_NODE_STATUS_DONE
    [2017-10-27T15:42:41.836Z] Command[313] status: addNode, status: INTERVIEW_CC
    [2017-10-27T15:42:41.845Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1325
    [2017-10-27T15:42:41.845Z] Command[314] start: sendData
    [2017-10-27T15:42:41.847Z] ProcessSendData[311]: To node: 12 with data: 0x861325 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:41.870Z] Command[314] end: sendData
    [2017-10-27T15:42:41.878Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x142501
    [2017-10-27T15:42:41.880Z] Command[313] status: addNode, status: INTERVIEW_CC_1_OF_12
    [2017-10-27T15:42:41.881Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1332
    [2017-10-27T15:42:41.883Z] Command[315] start: sendData
    [2017-10-27T15:42:41.891Z] ProcessSendData[312]: To node: 12 with data: 0x861332 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:41.916Z] Command[315] end: sendData
    [2017-10-27T15:42:41.923Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x143202
    [2017-10-27T15:42:41.924Z] Command[313] status: addNode, status: INTERVIEW_CC_2_OF_12
    [2017-10-27T15:42:41.924Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1372
    [2017-10-27T15:42:41.925Z] Command[316] start: sendData
    [2017-10-27T15:42:41.930Z] ProcessSendData[313]: To node: 12 with data: 0x861372 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:41.955Z] Command[316] end: sendData
    [2017-10-27T15:42:41.961Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x147202
    [2017-10-27T15:42:41.962Z] Command[313] status: addNode, status: INTERVIEW_CC_3_OF_12
    [2017-10-27T15:42:41.963Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1386
    [2017-10-27T15:42:41.963Z] Command[317] start: sendData
    [2017-10-27T15:42:41.965Z] ProcessSendData[314]: To node: 12 with data: 0x861386 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:41.987Z] Command[317] end: sendData
    [2017-10-27T15:42:41.996Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x148601
    [2017-10-27T15:42:41.997Z] Command[313] status: addNode, status: INTERVIEW_CC_4_OF_12
    [2017-10-27T15:42:41.997Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1320
    [2017-10-27T15:42:41.997Z] Command[318] start: sendData
    [2017-10-27T15:42:41.999Z] ProcessSendData[315]: To node: 12 with data: 0x861320 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.022Z] Command[318] end: sendData
    [2017-10-27T15:42:42.030Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x142001
    [2017-10-27T15:42:42.031Z] Command[313] status: addNode, status: INTERVIEW_CC_5_OF_12
    [2017-10-27T15:42:42.033Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1371
    [2017-10-27T15:42:42.034Z] Command[319] start: sendData
    [2017-10-27T15:42:42.037Z] ProcessSendData[316]: To node: 12 with data: 0x861371 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.061Z] Command[319] end: sendData
    [2017-10-27T15:42:42.068Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x147101
    [2017-10-27T15:42:42.069Z] Command[313] status: addNode, status: INTERVIEW_CC_6_OF_12
    [2017-10-27T15:42:42.070Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1370
    [2017-10-27T15:42:42.070Z] Command[320] start: sendData
    [2017-10-27T15:42:42.072Z] ProcessSendData[317]: To node: 12 with data: 0x861370 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.094Z] Command[320] end: sendData
    [2017-10-27T15:42:42.103Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x147001
    [2017-10-27T15:42:42.104Z] Command[313] status: addNode, status: INTERVIEW_CC_7_OF_12
    [2017-10-27T15:42:42.104Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1327
    [2017-10-27T15:42:42.104Z] Command[321] start: sendData
    [2017-10-27T15:42:42.108Z] ProcessSendData[318]: To node: 12 with data: 0x861327 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.142Z] Command[321] end: sendData
    [2017-10-27T15:42:42.144Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x142701
    [2017-10-27T15:42:42.145Z] Command[313] status: addNode, status: INTERVIEW_CC_8_OF_12
    [2017-10-27T15:42:42.146Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1385
    [2017-10-27T15:42:42.146Z] Command[322] start: sendData
    [2017-10-27T15:42:42.148Z] ProcessSendData[319]: To node: 12 with data: 0x861385 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.170Z] Command[322] end: sendData
    [2017-10-27T15:42:42.178Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x148501
    [2017-10-27T15:42:42.179Z] Command[313] status: addNode, status: INTERVIEW_CC_9_OF_12
    [2017-10-27T15:42:42.180Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1387
    [2017-10-27T15:42:42.180Z] Command[323] start: sendData
    [2017-10-27T15:42:42.184Z] ProcessSendData[320]: To node: 12 with data: 0x861387 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.209Z] Command[323] end: sendData
    [2017-10-27T15:42:42.216Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x148701
    [2017-10-27T15:42:42.217Z] Command[313] status: addNode, status: INTERVIEW_CC_10_OF_12
    [2017-10-27T15:42:42.217Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1375
    [2017-10-27T15:42:42.218Z] Command[324] start: sendData
    [2017-10-27T15:42:42.219Z] ProcessSendData[321]: To node: 12 with data: 0x861375 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.243Z] Command[324] end: sendData
    [2017-10-27T15:42:42.251Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x147502
    [2017-10-27T15:42:42.252Z] Command[313] status: addNode, status: INTERVIEW_CC_11_OF_12
    [2017-10-27T15:42:42.252Z] Node[12]: sendData to COMMAND_CLASS_VERSION, params 0x1356
    [2017-10-27T15:42:42.253Z] Command[325] start: sendData
    [2017-10-27T15:42:42.254Z] ProcessSendData[322]: To node: 12 with data: 0x861356 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.277Z] Command[325] end: sendData
    [2017-10-27T15:42:42.286Z] Node[12]: Received application command for COMMAND_CLASS_VERSION, data: 0x145601
    [2017-10-27T15:42:42.286Z] Command[313] status: addNode, status: INTERVIEW_CC_12_OF_12
    [2017-10-27T15:42:42.947Z] Command[313] status: addNode, status: INTERVIEW_MANUFACTURER_SPECIFIC
    [2017-10-27T15:42:42.960Z] Node[12]: sendData to COMMAND_CLASS_MANUFACTURER_SPECIFIC, params 0x04
    [2017-10-27T15:42:42.961Z] Command[326] start: sendData
    [2017-10-27T15:42:42.962Z] ProcessSendData[323]: To node: 12 with data: 0x7204 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:42.987Z] Command[326] end: sendData
    [2017-10-27T15:42:42.994Z] Node[12]: Received application command for COMMAND_CLASS_MANUFACTURER_SPECIFIC, data: 0x05009900020002
    [2017-10-27T15:42:43.018Z] Command[313] status: addNode, status: INTERVIEW_ASSOCIATION
    [2017-10-27T15:42:43.019Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x05
    [2017-10-27T15:42:43.019Z] Command[327] start: sendData
    [2017-10-27T15:42:43.021Z] ProcessSendData[324]: To node: 12 with data: 0x8505 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.043Z] Command[327] end: sendData
    [2017-10-27T15:42:43.053Z] Node[12]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x0604
    [2017-10-27T15:42:43.056Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x0201
    [2017-10-27T15:42:43.056Z] Command[328] start: sendData
    [2017-10-27T15:42:43.061Z] ProcessSendData[325]: To node: 12 with data: 0x850201 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.085Z] Command[328] end: sendData
    [2017-10-27T15:42:43.092Z] Node[12]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x03010100
    [2017-10-27T15:42:43.093Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x0202
    [2017-10-27T15:42:43.094Z] Command[329] start: sendData
    [2017-10-27T15:42:43.095Z] ProcessSendData[326]: To node: 12 with data: 0x850202 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.120Z] Command[329] end: sendData
    [2017-10-27T15:42:43.127Z] Node[12]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x03020100
    [2017-10-27T15:42:43.128Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x0203
    [2017-10-27T15:42:43.128Z] Command[330] start: sendData
    [2017-10-27T15:42:43.131Z] ProcessSendData[327]: To node: 12 with data: 0x850203 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.155Z] Command[330] end: sendData
    [2017-10-27T15:42:43.164Z] Node[12]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x03030100
    [2017-10-27T15:42:43.165Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x0204
    [2017-10-27T15:42:43.166Z] Command[331] start: sendData
    [2017-10-27T15:42:43.167Z] ProcessSendData[328]: To node: 12 with data: 0x850204 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.190Z] Command[331] end: sendData
    [2017-10-27T15:42:43.199Z] Node[12]: Received application command for COMMAND_CLASS_ASSOCIATION, data: 0x03040100
    [2017-10-27T15:42:43.202Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x010101
    [2017-10-27T15:42:43.202Z] Command[332] start: sendData
    [2017-10-27T15:42:43.204Z] ProcessSendData[329]: To node: 12 with data: 0x85010101 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.227Z] Command[332] end: sendData
    [2017-10-27T15:42:43.251Z] Command[313] end: addNode
    [2017-10-27T15:42:43.278Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x010101
    [2017-10-27T15:42:43.278Z] Command[333] start: sendData
    [2017-10-27T15:42:43.280Z] ProcessSendData[330]: To node: 12 with data: 0x85010101 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.303Z] Command[333] end: sendData
    [2017-10-27T15:42:43.309Z] Node[12]: sendData to COMMAND_CLASS_ASSOCIATION, params 0x010301
    [2017-10-27T15:42:43.309Z] Command[334] start: sendData
    [2017-10-27T15:42:43.312Z] ProcessSendData[331]: To node: 12 with data: 0x85010301 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.336Z] Command[334] end: sendData
    [2017-10-27T15:42:43.346Z] Node[12]: sendData to COMMAND_CLASS_CONFIGURATION, params 0x04000150
    [2017-10-27T15:42:43.346Z] Command[335] start: sendData
    [2017-10-27T15:42:43.348Z] ProcessSendData[332]: To node: 12 with data: 0x7004000150 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.371Z] Command[335] end: sendData
    [2017-10-27T15:42:43.374Z] Node[12]: sendData to COMMAND_CLASS_CONFIGURATION, params 0x040101ff
    [2017-10-27T15:42:43.374Z] Command[336] start: sendData
    [2017-10-27T15:42:43.376Z] ProcessSendData[333]: To node: 12 with data: 0x70040101ff and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:43.398Z] Command[336] end: sendData
    [2017-10-27T15:42:46.604Z] Node[7]: Received application command for COMMAND_CLASS_NOTIFICATION, data: 0x05000000ff070800
    [2017-10-27T15:42:46.620Z] Node[7]: Received application command for COMMAND_CLASS_SENSOR_BINARY, data: 0x03ff0c
    [2017-10-27T15:42:46.638Z] Node[7]: Received application command for COMMAND_CLASS_SENSOR_MULTILEVEL, data: 0x05030a001e
    [2017-10-27T15:42:56.326Z] Node[12]: sendData to COMMAND_CLASS_SWITCH_BINARY, params 0x02
    [2017-10-27T15:42:56.326Z] Command[337] start: sendData
    [2017-10-27T15:42:56.328Z] ProcessSendData[334]: To node: 12 with data: 0x2502 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:56.338Z] Node[12]: sendData to COMMAND_CLASS_METER, params 0x0110
    [2017-10-27T15:42:56.338Z] Command[338] start: sendData
    [2017-10-27T15:42:56.343Z] Node[12]: sendData to COMMAND_CLASS_METER, params 0x0100
    [2017-10-27T15:42:56.344Z] Command[339] start: sendData
    [2017-10-27T15:42:56.351Z] ProcessSendData[335]: To node: 12 with data: 0x320110 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:56.354Z] Command[337] end: sendData
    [2017-10-27T15:42:56.362Z] Node[12]: Received application command for COMMAND_CLASS_SWITCH_BINARY, data: 0x03ff
    [2017-10-27T15:42:56.871Z] ProcessSendData[336]: To node: 12 with data: 0x320100 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-10-27T15:42:56.874Z] Command[338] end: sendData
    [2017-10-27T15:42:56.880Z] Command[339] end: sendData
    [2017-10-27T15:42:56.894Z] Node[12]: Received application command for COMMAND_CLASS_METER, data: 0x02213400000000000100000000
    [2017-10-27T15:42:56.974Z] Node[12]: Received application command for COMMAND_CLASS_METER, data: 0x02213400000000000100000000
    [2017-10-27T15:42:57.014Z] Node[12]: Received application command for COMMAND_CLASS_METER, data: 0x02218400000000000100000000
    [2017-10-27T15:43:20.518Z] Node[7]: Received application command for COMMAND_CLASS_NOTIFICATION, data: 0x05000000ff07000108
    [2017-10-27T15:43:20.535Z] Node[7]: Received application command for COMMAND_CLASS_SENSOR_BINARY, data: 0x03000c
    [2017-10-27T15:43:30.783Z] Command[340] start: getNetworkTopology
    [2017-10-27T15:43:30.783Z] Command[340] start: getNetworkTopology
    [2017-10-27T15:43:30.928Z] Command[340] end: getNetworkTopology
    [2017-10-27T15:44:17.079Z] Node[3]: Received application command for COMMAND_CLASS_WAKE_UP, data: 0x07
    [2017-10-27T15:44:17.082Z] Node[3]: Marked as online
    [2017-10-27T15:44:17.144Z] Node[3]: Received application command for COMMAND_CLASS_BATTERY, data: 0x0352
    [2017-10-27T15:44:20.583Z] Node[3]: sendData to COMMAND_CLASS_WAKE_UP, params 0x08
    [2017-10-27T15:44:20.583Z] Command[341] start: sendData
    [2017-10-27T15:44:20.585Z] ProcessSendData[337]: To node: 3 with data: 0x8408 and txOptions: ACK,AUTO_ROUTE
    [2017-10-27T15:44:20.951Z] ProcessSendData[337]: Error: TRANSMIT_COMPLETE_NO_ACK
    [2017-10-27T15:44:20.953Z] Command[341] end: sendData
    [2017-10-27T15:44:20.957Z] Node[3]: Marked as offline



  • hmmm... so I have deleted a couple of apps Ive loaded and yet to actually configure and also noticed the harmony hub app has crashed a few times recently so removed that and after another reboot and waiting about 10 mins for it to connect to the cloud and eventually all the devices appear and now the plug has appeared .... this looks like maybe something more to do with homey than the app itself. going to try adding more of the plugs now and see how that goes. then I will try adding the harmony app back again..... Athoms advice to me was buy harmony hub and use that with homey to deal with issues with homeys IR hope thats not making the whole thing unstable 
Sign In or Register to comment.