This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

manager.vdevice.drivers.zwavebasic.pair.senddata_timeout

Hi I am trying to pair a Aeon labs Siren Gen5, it actually finds the device, starts pairing it and then says:
manager.vdevice.drivers.zwavebasic.pair.senddata_timeout
and exits.  It then has top be unpaired to try to pair it again. I have tried several times allways with the same results, tried to reboot the homey first, to no avail. 

Anyone any idea what I am doing wrong? 

this are the last lines of my Z-wave log:

[2017-06-26T18:36:29.039Z] Node[5]: sendData to COMMAND_CLASS_SWITCH_BINARY, params 0x02
[2017-06-26T18:36:29.065Z] Command[1] start: sendData
[2017-06-26T18:36:29.087Z] ProcessSendData[2]: To node: 5 with data: 0x2502 and txOptions: ACK,AUTO_ROUTE,EXPLORE
[2017-06-26T18:36:29.120Z] Node[5]: sendData to COMMAND_CLASS_SENSOR_MULTILEVEL, params 0x04
[2017-06-26T18:36:29.124Z] Command[2] start: sendData
[2017-06-26T18:36:29.151Z] Node[5]: sendData to COMMAND_CLASS_METER, params 0x0100
[2017-06-26T18:36:29.165Z] Command[3] start: sendData
[2017-06-26T18:36:31.257Z] ProcessSendData[2]: Error: senddata_timeout
[2017-06-26T18:36:31.279Z] ProcessSendData[3]: To node: 5 with data: 0x3104 and txOptions: ACK,AUTO_ROUTE,EXPLORE
[2017-06-26T18:36:31.299Z] Command[1] end: sendData
[2017-06-26T18:36:33.337Z] ProcessSendData[3]: Error: senddata_timeout
[2017-06-26T18:36:33.369Z] ProcessSendData[4]: To node: 5 with data: 0x320100 and txOptions: ACK,AUTO_ROUTE,EXPLORE
[2017-06-26T18:36:33.399Z] Command[2] end: sendData
[2017-06-26T18:36:33.625Z] ProcessSendData[4]: Marked node 5 as offline for the next 1800000ms
[2017-06-26T18:36:33.628Z] ProcessSendData[4]: Error: TRANSMIT_COMPLETE_NO_ACK
[2017-06-26T18:36:33.656Z] Command[3] end: sendData
[2017-06-26T18:37:24.030Z] Command[4] start: addNode
[2017-06-26T18:37:24.210Z] Command[4] status: addNode, status: ADD_NODE_STATUS_LEARN_READY
[2017-06-26T18:37:25.362Z] Command[4] status: addNode, status: ADD_NODE_STATUS_NODE_FOUND
[2017-06-26T18:37:25.778Z] Command[4] status: addNode, status: ADD_NODE_STATUS_ADDING_SLAVE
[2017-06-26T18:37:29.731Z] Command[4] status: addNode, status: ADD_NODE_STATUS_PROTOCOL_DONE
[2017-06-26T18:37:29.810Z] Command[4] status: addNode, status: ADD_NODE_STATUS_DONE
[2017-06-26T18:37:30.329Z] Command[4] status: addNode, status: INTERVIEW_SECURITY
[2017-06-26T18:37:30.343Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x0400
[2017-06-26T18:37:30.348Z] Command[5] start: sendData
[2017-06-26T18:37:30.409Z] ProcessSendData[6]: To node: 12 with data: 0x980400 and txOptions: ACK,AUTO_ROUTE,EXPLORE
[2017-06-26T18:37:30.560Z] Command[5] end: sendData
[2017-06-26T18:37:30.580Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x0500
[2017-06-26T18:37:30.624Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x40
[2017-06-26T18:37:30.632Z] Command[6] start: sendData
[2017-06-26T18:37:30.659Z] ProcessSendData[7]: To node: 12 with data: 0x9840 and txOptions: ACK,AUTO_ROUTE,EXPLORE
[2017-06-26T18:37:30.772Z] Command[6] end: sendData
[2017-06-26T18:37:30.802Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x80f740e2304b731f1b
[2017-06-26T18:37:30.840Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x810cfb7ca6b24d3d6849bbad8b1a7c65666ead6830718e11c2c02cc1f7af9bca692739d53b
[2017-06-26T18:37:30.844Z] Command[7] start: sendData
[2017-06-26T18:37:30.873Z] ProcessSendData[8]: To node: 12 with data: 0x98810cfb7ca6b24d3d6849bbad8b1a7c65666ead6830718e11c2c02cc1f7af9bca692739d53b and txOptions: ACK,AUTO_ROUTE,EXPLORE
[2017-06-26T18:37:30.902Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x80f740e2304b731f1b
[2017-06-26T18:37:32.907Z] ProcessSendData[8]: Error: senddata_timeout
[2017-06-26T18:37:32.930Z] Command[7] end: sendData
[2017-06-26T18:37:32.958Z] Command[4] end: addNode
[2017-06-26T18:39:24.008Z] Command[8] start: addNode
[2017-06-26T18:39:24.057Z] Command[8] status: addNode, status: ADD_NODE_STATUS_LEARN_READY
[2017-06-26T18:39:54.112Z] Command[8] status: addNode, status: ADD_NODE_STATUS_DONE
[2017-06-26T18:39:54.116Z] ProcessAddNode[9]: Error: timeout
[2017-06-26T18:39:54.161Z] Command[8] end: addNode
[2017-06-26T18:40:46.855Z] Command[9] start: addNodeAbort
[2017-06-26T18:40:46.889Z] Command[9] end: addNodeAbort
[2017-06-26T18:41:09.385Z] Command[10] start: getNetworkTopology
[2017-06-26T18:41:09.385Z] Command[10] start: getNetworkTopology
[2017-06-26T18:41:09.572Z] Command[10] end: getNetworkTopology

Comments

Sign In or Register to comment.