›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

Fibaro fgms-001 zw5 instellingen

nickvandergraafnickvandergraaf Member
in Nederlands
Ik wil met behulp van de Motionsensor de Temperatuur in de Badkamer regelen.
Hoe kan ik hem het beste instellen? Ik heb het idee dat de temperatuur nu niet goed wordt weergegeven. Als ik hem bij inzichten bekijk in de grafiek dan zie ik alleen een meting van vanmorgen.
Net heb ik de "Temperatuur rapportage interval (seconden) aangepast naar 600. Maar zie nog geen verandering.

In de woonkamer hangt ook nog een Motionsensor. Maar deze geeft ook een melding als de katten door de kamer heen wandelen. Is er iemand die al een goede setting heeft voor de Gevoeligheid?

Comments

  • TedTolboomTedTolboom Member
    @nickvandergraaf met betrekking tot het aanpassen van de temperatuur rapportage interval. Heb je de sensor wakker gemaakt (3x B-button) voordat je op save hebt gedrukt en daarna de melding gekregen dat de settings succesvol zijn toegepast? Of heb je de settings gesaved en kreeg je de melding dat de settings worden toegepast bij de eerst volgende keer dat de sensor wakker wordt?

    In het laatste geval kan het tot 7200 seconden (wakeup interval) duren voordat de sensor de settings ontvangt en doorvoert.

    Voor de gevoeligheid van de andere sensor; je zou kunnen spelen met het aanpassen van de bewegingssensor gevoeligheid (zie hint bij settings). Maar ik heb hier zelf nog geen optimum in gevonden met onze Jack Russel...
  • nickvandergraafnickvandergraaf Member
    edited March 2017
    Ik heb hem niet wakker gemaakt voordat ik de instellingen op heb geslagen.
    Maar de 2 uur zijn voorbij en als ik bij inzicht kijk dan zie ik nog niet elke 10 minuten een meting.

    Maar ik denk dat het in de verbinding zit!

    [2017-03-18T22:36:03.194Z] Node[8]: Received application command for COMMAND_CLASS_CRC_16_ENCAP, data: 0x013105030a00000791
    [2017-03-18T22:36:03.217Z] Node[8]: Decapsulated frame from COMMAND_CLASS_CRC_16_ENCAP to COMMAND_CLASS_SENSOR_MULTILEVEL, data 0x05030a0000
    [2017-03-18T22:45:40.896Z] Node[8]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
    [2017-03-18T22:45:40.900Z] Node[8]: sendData to COMMAND_CLASS_SECURITY, params 0x80ece392d366803750
    [2017-03-18T22:45:40.901Z] Command start: sendData
    [2017-03-18T22:45:40.924Z] ProcessSendData[1780]: To node: 8 with data: 0x9880ece392d366803750 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-03-18T22:45:41.143Z] Command end: sendData
    [2017-03-18T22:45:41.408Z] Node[8]: Received application command for COMMAND_CLASS_SECURITY, data: 0x814fb1d809d868ef34cb7771ec89078fce1856e5c1
    [2017-03-18T22:45:41.438Z] Node[8]: Marked as online
    [2017-03-18T22:45:41.440Z] Node[8]: Decapsulated frame from COMMAND_CLASS_SECURITY to COMMAND_CLASS_WAKE_UP, data 0x07
    [2017-03-18T22:45:41.454Z] Node[8]: sendData to COMMAND_CLASS_BATTERY, params 0x02
    [2017-03-18T22:45:41.455Z] Command start: sendData
    [2017-03-18T22:45:41.467Z] ProcessSendData[1781]: To node: 8 with data: 0x8002 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-03-18T22:45:41.800Z] Command end: sendData
    [2017-03-18T22:45:42.324Z] Node[8]: Received application command for COMMAND_CLASS_BATTERY, data: 0x0355
    [2017-03-18T22:45:51.450Z] Node[8]: Marked as offline
    [2017-03-18T22:46:03.964Z] Node[8]: Received application command for COMMAND_CLASS_CRC_16_ENCAP, data: 0x013105030a00000791
    [2017-03-18T22:46:03.984Z] Node[8]: Decapsulated frame from COMMAND_CLASS_CRC_16_ENCAP to COMMAND_CLASS_SENSOR_MULTILEVEL, data 0x05030a0000
    [2017-03-18T22:49:36.767Z] Node[12]: Received application command for COMMAND_CLASS_SENSOR_MULTILEVEL, data: 0x05030a0004
    [2017-03-18T22:54:57.055Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
    [2017-03-18T22:54:57.057Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x80e653126797a300f2
    [2017-03-18T22:54:57.058Z] Command start: sendData
    [2017-03-18T22:54:57.075Z] ProcessSendData[1782]: To node: 12 with data: 0x9880e653126797a300f2 and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-03-18T22:54:57.196Z] Command end: sendData
    [2017-03-18T22:54:57.229Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x81e1af8ece410e51893a7feeb8da5f3e6920f0e6491bbc69a80a3006
    [2017-03-18T22:54:57.254Z] Node[12]: Decapsulated frame from COMMAND_CLASS_SECURITY to COMMAND_CLASS_NOTIFICATION, data 0x05000000ff070800
    [2017-03-18T22:55:28.381Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
    [2017-03-18T22:55:28.383Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x8075084622831323ce
    [2017-03-18T22:55:28.383Z] Command start: sendData
    [2017-03-18T22:55:28.393Z] ProcessSendData[1783]: To node: 12 with data: 0x988075084622831323ce and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-03-18T22:55:28.546Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
    [2017-03-18T22:55:28.547Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x8072bdd2f59f48e01d
    [2017-03-18T22:55:28.549Z] Command start: sendData
    [2017-03-18T22:55:28.605Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
    [2017-03-18T22:55:28.606Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x80a7b98aa0fa86092b
    [2017-03-18T22:55:28.606Z] Command start: sendData
    [2017-03-18T22:55:28.662Z] ProcessSendData[1784]: To node: 12 with data: 0x988072bdd2f59f48e01d and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-03-18T22:55:28.681Z] Command end: sendData
    [2017-03-18T22:55:28.739Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x40
    [2017-03-18T22:55:28.742Z] Node[12]: sendData to COMMAND_CLASS_SECURITY, params 0x80776de00aa64fecee
    [2017-03-18T22:55:28.743Z] Command start: sendData
    [2017-03-18T22:55:28.791Z] Node[12]: Received application command for COMMAND_CLASS_SECURITY, data: 0x81dc5f453e14d5ba39e7d4c05735d2cb774ab77075ee2cc1a13aeb9671
    [2017-03-18T22:55:28.810Z] Node[12]: Decapsulated frame from COMMAND_CLASS_SECURITY to COMMAND_CLASS_NOTIFICATION, data 0x05000000ff07000108
    [2017-03-18T22:55:33.663Z] ProcessSendData[1784]: Error: timeout
    [2017-03-18T22:55:33.672Z] ProcessSendData[1785]: To node: 12 with data: 0x9880a7b98aa0fa86092b and txOptions: ACK,AUTO_ROUTE,EXPLORE
    [2017-03-18T22:55:33.681Z] Command end: sendData
    [2017-03-18T22:55:35.118Z] ProcessSendData[1785]: Marked node 12 as offline for the next 1800000ms
    [2017-03-18T22:55:35.118Z] ProcessSendData[1785]: Error: TRANSMIT_COMPLETE_NO_ACK
    [2017-03-18T22:55:35.130Z] ProcessSendData[1786]: To node: 12 with data: 0x9880776de00aa64fecee and txOptions: ACK,AUTO_ROUTE
    [2017-03-18T22:55:35.135Z] Command end: sendData
    [2017-03-18T22:55:36.468Z] ProcessSendData[1786]: Error: TRANSMIT_COMPLETE_NO_ACK
    [2017-03-18T22:55:36.476Z] Command end: sendData
    [2017-03-18T22:56:04.714Z] Node[8]: Received application command for COMMAND_CLASS_CRC_16_ENCAP, data: 0x013105030a00000791
    [2017-03-18T22:56:04.755Z] Node[8]: Decapsulated frame from COMMAND_CLASS_CRC_16_ENCAP to COMMAND_CLASS_SENSOR_MULTILEVEL, data 0x05030a0000
    [2017-03-18T23:01:10.078Z] Command start: getNetworkTopology
    [2017-03-18T23:01:10.078Z] Command start: getNetworkTopology
    [2017-03-18T23:01:10.279Z] Command end: getNetworkTopology

    Ik ga maandag verder kijken. Denk dat ik de modules ga verwijderen en resetten. Kijken of hij dan wel een goede verbinding houdt.

  • nickvandergraafnickvandergraaf Member
    Verwijderen en resetten van de Sensoren heeft geholpen.
    De homey daarna opnieuw opgestart. En de modules weer toegevoegd en instelling aangepast.
    Modules nog een keer wakker gemaakt en het werkt.
    Nu worden elke 10 minuten de waardes doorgestuurd!

    Nu alleen nog kijken hoe ik de gevoeligheid het beste kan instellen.
Sign In or Register to comment.