›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Closed

Düwe

2»

Comments

  • MarcoFMarcoF Member
    yeah I read that, but where to find these files? Online?
  • RobinVanKekemRobinVanKekem Member
    Did you google for 'open z-wave config files'  :p

    https://github.com/OpenZWave/open-zwave/tree/master/config
  • JesperJesper Member
    At home I have the Düwi dimmer on the picture below (Model ZW BJ EDAN 300). Before the specific Z-Wave apps were introduced it used to work with my Homey and I was able to set it to percentage I want. However, now it's only recognized as a basic Z-Wave device and I'm only able to switch it on/off. Does somebody else also have this dimmer and has it fully working in combination with Homey. Maybe there is a nice work around ;).
     
  • Priknr1Priknr1 Member
    edited September 2016
    MarcoF said:
    Duwi is a "sub brand" of zwave.me

    I'm currently working on support for the duwi rollershutter:
    http://www.pepper1.net/zwavedb/device/119

    "Development" of the driver is  fairly easy and is going fast, only the acceptance of the pull request is going "very slow". @athom said the would review some request, sadly no updates are available in the appstore. 


    Hi MarcoF

    Having a few duwi wallmounted switches myself:
    - blinds control
    - 3 wire dimmer
    -2 wire dimmer
    - On/off switches


    I just rebuild the fibaro driver to test one dimmer. i was able to dim, in stead of it becoming an on/off switch.
    How far along are you in building a Duwi app?

    Need any help? I would be happy to assist, so I am able to use all my stuff sooner. And it is nonsence if I build it from scrap if you already have some stuff.

    Jesper, just wait till the Duwi app is available :)
  • MarcoFMarcoF Member
    Duwi is sub/deprecated brand of zwave.me. There's already an zwave.me app and I did a pull request off my driver to that repo. 

    For now I'm also stopped developing for homey. 

    So don't wait on me ;) 
  • Priknr1Priknr1 Member
    edited September 2016
    Jesper said:
    At home I have the Düwi dimmer on the picture below (Model ZW BJ EDAN 300). Before the specific Z-Wave apps were introduced it used to work with my Homey and I was able to set it to percentage I want. However, now it's only recognized as a basic Z-Wave device and I'm only able to switch it on/off. Does somebody else also have this dimmer and has it fully working in combination with Homey. Maybe there is a nice work around .


    @Jesper  I am working on the z-wave.me app. Adding the nodes from duwi I currently have.
    Can you provide me the Manufacturer ID, Product Type ID and Product ID of your device. 
    I will add your device to the z-wave.me database.

    You can find this info under the wrench-icon, after you have added the device in Homey.
  • JesperJesper Member
    @Priknr1 See picture below for the info I got when clicking the wrench-icon of my duwi Z-Wave dimmer. Is this all the info you need?

    Thanks for your help :smile: 




  • Priknr1Priknr1 Member
    Jesper said:
    @Priknr1 See picture below for the info I got when clicking the wrench-icon of my duwi Z-Wave dimmer. Is this all the info you need?

    Thanks for your help :smile: 
    That is all I need. It is the same dimmer as I have. So I already put this one in.
    Will try to upload the new app to github this week. But dont know when it will be actually implemented.
  • RadiantBeeRadiantBee Member
    edited September 2016
    Hi guys,

    Just for reference I looked up the ManufacturedId in the pepperdb:
    Here is the link: http://www.pepper1.net/zwavedb/device/11

    Seems the manufacurer is known as: Reitz-Group.de
  • RadiantBeeRadiantBee Member
    Any your device:
    http://www.pepper1.net/zwavedb/device/33
  • JesperJesper Member
    @Priknr1 Do you have an idea when the update of the app is implemented? I want to try out my Duwi dimmrs.
  • JesperJesper Member
    edited November 2016
    Today I tried the v0.0.6 of the Z-Wave.Me app but my dimmer is still not recognized as a dimmer. So I'm still only able to switch the light on or off instead of set it to a percentage.

    It's strange that I could perfectly use my dimmer a few months ago and now Homey does not recognize it correctly anymore
  • pascalpascal Member
    Is there anyone willing to add support for the Düwi 054368 Mountable Blind Control (this is not a z-wave.me device but a regular device).

    When I add it to homey it is only recocnized as a default zwave device. 
  • Priknr1Priknr1 Member
    edited November 2016
    I suggested before to make a separate Duwi app. But some people thought otherwise.
    I am guessing this device will need to be implemented in the z-wave.me app too.

    I think it is best to lock this topic, and keep discussions in one topic. Being th zwave.me one.

    https://forum.athom.com/discussion/comment/36889#Comment_36889


  • MichaelMichael Member
    I'm also looking for support of the http://www.pepper1.net/zwavedb/device/33
  • Priknr1Priknr1 Member
    Any discussion regarding duwi devices.  Dont use this topic anymore

    Please use the z-wave.me topic.
    https://forum.athom.com/discussion/1791/published-z-wave-me-for-homey/p1

    to keep it all in 1 place.


This discussion has been closed.