This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.

[App] Philio

245

Comments

  • MarkSwift said:
    is there a chance you can add the in wall switches, I have 5 of them...
    Yeah sure.
    Could you share me the info Homey currently has on this device?
    Great, I'll need to open one of the sockets to include it again, right?
  • No. After you paired the device go to the wrench (which will appear if you hover with your mouse over it on the top left corner of the device) and open node information.
  • App is awaiting approval in the app store.
  • @RobinVanKekem Hero!!!!!  :) :) :)
  • Since the app ID remains the same I'm hoping it will auto update to my version of the app which I gave a higher version number.
    I haven't changed anything on the code to see if it's working as expected.
    After that I'll start adding the above, currently unsupported, devices.
  • Version 0.4 has been published to the store!
    Could you guys check if it updates?
    Without using the install button from the store.
    Although that should also work but beware so you don't lose any devices!

    https://apps.athom.com/app/com.philio
  • @RobinVanKekem My Homey has done his update on the app, now showing v0.0.5
  • v0.0.4 I hope you have?
  • MarkSwiftMarkSwift Member
    edited October 2016
    Hopefully this is what you're looking for to add my in wall relays.

    It's this device: PHI_PAN06 Relay Insert 2 * 1.5 KW - Z-Wave Europe Manuals



  • Yes
     <3 
  • RozzRozz Member
    edited October 2016
    v0.0.4 I hope you have?
    Nope....as you can see...v0.0.5




    And for more info on the Philio PSR04 Smart Color Button:


  • Hi,
    When adding i cant see witch type to chooze.
    I have the PST02-1A
    Is it the first or the second?
    THX!

  • If you hover over it you get a popup with the full name..
  • Thx!
  • seems not to work, i only see
    Selecteer een apparaat...
    No which device.
  • AlleAlle Member
    edited October 2016
    cautje said:
    seems not to work, i only see
    Selecteer een apparaat...
    No which device.

    Add your device with Z-wave under Homey. It will detect the correct Philio Device once you have the app installed.

  • Rozz said:
    v0.0.4 I hope you have?
    Nope....as you can see...v0.0.5





    As you can see via the link below, the official version in the store is v0.0.4
    https://apps.athom.com/app/com.philio
  • How can i have v0.0.5 than? Have done no manual update or any other kind of install....
  • Rozz said:
    How can i have v0.0.5 than? Have done no manual update or any other kind of install....
    Might be that there was a newer version available than what I got.
    Do you have the app locally installed through the Athom CLI?
  • Rozz said:
    How can i have v0.0.5 than? Have done no manual update or any other kind of install....
    Might be that there was a newer version available than what I got.
    Do you have the app locally installed through the Athom CLI?
    Nope, installed it through the normal appstore, but does it really matter?
  • Then you could have a newer version of the than I do.
  • I dont see why this is a problem, since the PSR04 does not work with my version (or the 0.0.4) , so its of no good to me anyway.

  • I have a problem with the Philio Slim Multi-Sensor PST02-A 3:1
    The motion alarm does not turning off. 
    I have ask marcoF a time a go. But forgot what it was. 
    Could be a setting or something with homey it self. 
  • Any news on my relay?  o:)
  • No, haven't got many time to do things, sorry.
    My 8 weeks old daughter is keeping us busy :)
  • Argh, congrats!
  • edited October 2016
    Have had issues pairing my PST02-A 3:1, it's only reporting temperature (in Fahrenheit). These are all settings you can apply, but the current version in the store keeps crashing when trying to change setting parameters. Also no other sensors are reporting their status. Talked with Inversion-NL about this but he doesn't have this device so can't test it himself. Is there any one that successfully paired their PST02-A?

    I tried to fix it last night in the github branch but didn't succeed.

    I think the main reason that the device becomes a 'brick' (not blinking when movement is detected or when the door sensor is triggered) is because of the bit settings. Is there anyone here that knows how to handle setting bits in Z-wave? Best practices?

    To make myself more clear, there are three settings in the PST02-A. Operation Mode, Multi Sensor Switch Function and Customer Function  resp. position 5, 6 and 7. These three values all contain 8 bits which can hold settings. What is the best way to set (in Homey) the bits 00000100 (representing 4) in the settings? What I currently use is the following:

    "operation_mode": {
     "index": 5,
     "size": 1,
     "parser": function (input) {
      return new Buffer([parseInt(input)]);
     }
    }

    Any ideas are welcome, would be nice to support the PST02-A (and then also the PST02-B and PST02-C are supported because they all have the same settings, exept one has more capabilities then the other).
  • casedacaseda Member
    edited October 2016
    please remove the entire parser, it is not used anymore for 99% of all settings
    and probably the cause of the crashes
    so only the index and size values stay
  • Thanks, will apply these changes later this week to try it out. This will hopefully solve the issues with the device :smiley: 

    Another question I've been wondering about for quite a while now. is there any difference (for the driver) between the values, or are they all parsed to one byte in the end? E.g. when the manual states that the values can have a range of: 0 ~ 0x7F and for another parameter the range is 0 ~ 127, is this for Homey the same (are they all numeric inputs, since 0x7f translates to 127).
Sign In or Register to comment.