›
This is the forum archive of Homey. For more information about Homey, visit the Official Homey website.

The Homey Community has been moved to https://community.athom.com.

This forum is now read-only for archive purposes.
Closed

KaKu 1.1.4 device problems

mbalik79mbalik79 Member
in Archive
After installing/update to Kaku app 1.1.4 the devices only works while testing in add-mode. If devices are add they do not respond. Anyone else with this problem (firmware 0.8.38)
«1

Comments

  • bvdbosbvdbos Member
    nope, everything works as it did before: insights and triggers are back...
  • mbalik79mbalik79 Member
    edited June 2016
    nope, everything works as it did before: insights and triggers are back...
    Then I have another problem. Cannot add anything. It's starts after the update. Light will not go on. Add device again, it did response when testing. But after added nothing happens. Did already new install/soft reboot/hard reboot...nothing.

    Only testing works for me...
  • DennisBlotenburgDennisBlotenburg Member
    I've the same. But I'm using version 0.8.32 with KAKU 1.1.4. 
    I'm unable to switch my lights on. Before 18.30 all works perfect. Something wrong at the back-end?
  • mbalik79mbalik79 Member
    DennisBlotenburg said:
    I've the same. But I'm using version 0.8.32 with KAKU 1.1.4. 
    I'm unable to switch my lights on. Before 18.30 all works perfect. Something wrong at the back-end?
    I hope there's soon coming an update/sollution. I have put all the Kaku devices back to my homewizard..  :'(
  • PhuturistPhuturist Member
    Seeying the same issues, KAKU stopped working after the update to 1.1.14 ... :neutral: 
  • mbalik79mbalik79 Member
    Phuturist said:
    Seeying the same issues, KAKU stopped working after the update to 1.1.14 ... :neutral: 
    More people have the problem #slack

  • WathLamersWathLamers Member
    KAKU.
    my sensors doesent work.
    the swiches however do work fine.
    i cannot install new though
  • BasPostBasPost Member
    my KAKU modules also stopped working after the KAKU updated itself after reboot this evening...
  • WathLamersWathLamers Member
    thats right.
    AFTER reboot.
    did not mention that
  • djeskodjesko Member
    did add doorbell , wall switch , remote and light sensor and all working here  ...
  • mbalik79mbalik79 Member
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

  • djeskodjesko Member
    mbalik79 said:
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

    jupp , sorry did forget to add fw and app version
  • mbalik79mbalik79 Member
    djesko said:
    mbalik79 said:
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

    jupp , sorry did forget to add fw and app version
    and if you are adding a new device?

  • BasPostBasPost Member
    djesko said:
    mbalik79 said:
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

    jupp , sorry did forget to add fw and app version
    Did you reboot?
  • djeskodjesko Member
    mbalik79 said:
    djesko said:
    mbalik79 said:
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

    jupp , sorry did forget to add fw and app version
    and if you are adding a new device?

    did add door and night sensor after new app install , will try a reboot now
  • mbalik79mbalik79 Member
    djesko said:
    mbalik79 said:
    djesko said:
    mbalik79 said:
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

    jupp , sorry did forget to add fw and app version
    and if you are adding a new device?

    did add door and night sensor after new app install , will try a reboot now
    Are you sure to reboot.... :#
  • djeskodjesko Member
    mbalik79 said:
    djesko said:
    mbalik79 said:
    djesko said:
    mbalik79 said:
    djesko said:
    did add doorbell , wall switch , remote and light sensor and all working here  ...
    KaKu app 1.1.4 / firmware 0.8.38?

    jupp , sorry did forget to add fw and app version
    and if you are adding a new device?

    did add door and night sensor after new app install , will try a reboot now
    Are you sure to reboot.... :#
    all good after reboot 
  • mbalik79mbalik79 Member
    Strange there are many people with troubles
  • djeskodjesko Member
    i did a reset before .38 update and started over ...
  • mbalik79mbalik79 Member
    ah ok.. thanks for you're comments. Hope there is soon a solution for me  :)
  • BasPostBasPost Member
    I  hope this will be fixed soon, my garden en outside lights are now turned off! Burglars here they come...
  • MennoVanGrinsvenMennoVanGrinsven Member
    KaKu here also not working anymore after the app update. running .38

  • djeskodjesko Member
    Did add a socket copy remote option,  on/off does not work. 
  • martijn1980martijn1980 Member
    Neither working at my place 
  • adjuadju Member
    Kaku app version 1.1.4 - Firmware .38

    All Kaku stopped.
  • cnvissercnvisser Member
    Can't add sockets here to.
    But devices that where added before the update still work.

    .38/1.1.4
  • KoenMartensKoenMartens Member
    Every kaku stopped working for me, also after cold reboot (.38/1.1.4)
  • WathLamersWathLamers Member
    after a night rest,  kaku seems to work alright.
    sensors work now.
    38   /   1.1.4         homey was plugged in all night.     i have not rebooted since yesterday evening
  • RonaldRonald Member
    Code checker is gone :o
  • MartijnDeRhoterMartijnDeRhoter Member
    It's due to this issue: https://github.com/athombv/homey/issues/682. It fixed the sensors that didn't work before, but seems to have broken the transmitting part.

This discussion has been closed.